Basics of Golf Clubmaking Series
Build Your Own Golf Clubs With The Hireko Golf "Basics of Golf Clubmaking Video Series"
New To Golf Clubmaking? Follow Our New Clubmaking Video Series!
Have fun and learn how to assemble a custom golf club, while getting started In custom golf clubmaking in just a few short minutes. The "Basic Golf Clubmaking Video Series" of easy to understand and step-by-step golf clubmaking videos are taught by Hireko Golf's Technical Director Jeff Summitt. Jeff will walk you through all the basic steps required and show you how to build a golf club from golf components. The benefits of assembling your own golf clubs are many from the financial rewards to being able to match the components and their specifications specifically to your swing characteristics, naturally lowering your scores. In addition, assembling golf clubs from components in a great new hobby that not only you can enjoy and perfect throughout your lifetime, but can potentially become profitable as well.
|What Will the "Basics of Golf Clubmaking Video Series" Teach Me?
- Show you all the materials and tools needed to get started
- How to tip trim and properly abrade a golf shaft
- How to properly install, epoxy and turn down ferrules
- How to cut a golf shaft to length
- Final clean up
For more detailed information on golf clubmaking, refer to Jeff Summitt's best-selling book,
"The Modern Guide to Golf Clubmaking"
Basics of How To Assemble a Golf Club Videos
Basic tools needed for the "How To Assemble a Custom Golf Club" series include:
|Vinyl Shaft Clamp||#RAVC||$2.20 each|
|48" Clubmaking Ruler||#MIT025||$10.99 each|
|Rod Saw Blade||#GG12-50T||$3.95 each|
|Sandpaper (Course 80-110 grit, Medium 150-180 grit)|
|Utility Knife||#MIT051||$9.95 each|
|Golf Ferrule Installation Tool||#FBLOCK||$19.95 each|
and materials you will need:
|24-hour, high strength Golf Shafting Epoxy||#EP05||$5.95 each|
|Two-Way Golf Grip Tape||#PIP||$.40 per strip|
|Felt Tip Marker|
|Golf Grip Solvent||#SV02||$3.95 each|
|Golf Ferrules||Starts $2.45|
|000 Steel Wool|
Part 1. Getting Started With Golf Clubmaking Video
Contents of this first video on how to assemble a golf club include the tools and materials needed to get started plus handy tips to make sure you always begin your assembly process correctly.
Part 2 Test Fitting Golf Components
Contents of this second video will teach you proper pre-assembly techniques. It is always a wise practice to check the fit of the head and shaft prior to building your golf club.
Part 3 How To Read Golf Shaft Trimming Instructions
Contents of this third video will explain how to read and understand tip trimming tables so you know how properly tip trim a golf shaft. With golf shafts becoming more and more expensive, one tip trims the golf shaft (if any is required) so the shaft plays the flex as the manufacturer and you don’t make an expensive mistake.
Contents of this fourth video will demonstrate how to tip trim steel golf shafts and how to tip trim graphite golf shafts manually. For a steel shaft, we are going to use our tubing cutter; the preferred method when cutting a golf shaft by hand. However, to safely cut a graphite or composite golf shaft, we will use a rod saw blade to avoid cracking or splintering what could potentially be a very expensive shaft.
Part 5 How To Properly Abrade or Sand a Golf Shaft Tip
Contents of this fifth video will demonstrate how to properly abrade (prep, sand or roughen) the tip of a golf shaft manually. For both steel and graphite shafts, we are going to use different grits of sandpaper using a shoeshine method. When done properly, this will allow a proper surface for the epoxy and not cause damage to the shaft at a later date.
Part 6 How To Install A Golf Ferrule and Apply Epoxy Onto A Golf Shaft
Contents of this sixth video will demonstrate how to install a basic golf club ferrule as well as epoxy the golf shaft onto a golf clubhead. In this segment, we are going to use a golf ferrule installation tool to get the ferrule started. Jeff will also demonstrate measuring and mixing 2-part high strength golf shafting epoxy the right way for a long lasting bond.
Part 7 How To Turn Down The Ferrule On a Golf Club
Contents of this seventh video will explain one the most common steps that beginning clubmakers either dread or avoid doing altogether and why it is important how to do this in the assembly process. In this segment Jeff will demonstrate how to properly finish or turn down a ferrule by hand using normal items such as acetone, steel wool and sandpaper. Their usage will depend on how severe the lip is against the top of the hosel.
Part 8 How To Cut A Golf Shaft To Length
Hireko Golf’s technical director Jeff Summitt will demonstrate how to cut a golf club to length manually from the butt end. You will find out first how length is measured to obtain our final length and account for the additional length of the grip cap. For a graphite shaft, we are going to use our rod saw blade and a tubing cutter for the steel shaft; the preferred methods when cutting a golf shaft by hand.
Part 9 How to Install a Golf Grip
Hireko Golf’s technical director Jeff Summitt will demonstrate how to install a golf grip in four simple steps. In this exercise you will need some basic materials starting with a bench vise, vinyl shaft clamp, double-sided grip tape, solvent and a catch pan to collect any excess solvent.
Part 10 Final Golf Club Assembly Steps
Hireko Golf’s technical director Jeff Summitt will discuss some of the final assembly steps to provide that professional appearance. He will also share some insight once you have started to build golf clubs from component parts something to strive for to get the most out of you newfound hobby or on your way to becoming a professional clubmaker in the future.
Hireko Has The Lowest Price On All Branded Shafts & Grips It Carries. Period
View our Price Match Guarantee On Branded Shafts & Grips here.