This golf ball accelerating shaft is designed to fit a wide range of players with providing the right amount of weight and flex for additional distance, control and feel. The unique 360 degree graphics allow the shaft to be aligned in any position and look aligned, perfect for clubmakers who conduct their shaft alignment and especially for installation in the Dynacraft Prophet ICT adjustable driver series.
Questions on Dynacraft Super Collider Graphite Shafts
- From JIm Stephens at 10/16/14 10:28 AM
- Have the super collider graphite shafts iron shafts ever been used in Hybrid clubs ?
As long as the hybrid has a 0.370" tip, you can use these shafts. Just make sure when tip trimming to base the amount to trim on the weight of the head (relative to a normal iron) as not all hybrids weigh the same. For instance, if the #4 hybrid weighed the same as a #3 iron, tip trim and make the length of a #3 iron.
- Do you find this question helpful? Yes No
Ask Your Own Question
|Model #||Weight||Flex||Torque||Butt Diameter||Tip Diameter||Raw Length||Ball Flight||Parallel Tip||Trim Code||UPC|
|GS256542-001-WAL||61||A/L||6 d||0.580 in||0.335" Parallel||46 in||Mid-High||6 in||L: W4 / A: W8|
|GS256542-001-WRS||64||R/S||6 d||0.590 in||0.335" Parallel||46 in||Mid-High||6 in||R: W4 / S: W8|
|GS256542-001-IAL||76||A/L||4 d||0.580 in||0.370" Parallel||41 in||Mid||5.5 in||L: IH4 / A: IH12|
|GS256542-001-IRS||82||R/S||3.5 d||0.600 in||0.370" Parallel||41 in||Mid||5.5 in||R: IH4 / S: IH16|