Details
Interchangeable shaft technology is all well and good, but what if you had technology that would allow you to adjust the lie and face angle of the clubhead itself? This breakthrough technology is now available from the amazing new Dynacraft ICT. The ICT features a unique adjustable 8-position hosel. Each hosel position provides differing lie and face angles of the clubhead, allowing you to optimize the club for your swing tendencies. The hosel is instantly adjustable, which means you can make changes on-the-spot. The Prophet ICT driver is not designed as a fitting tool (although it can be used as one), rather a club you can be fit for on the spot and taken home or to the course immediately. As your game progresses or if you are simply looking for a change of new technology, additional shafts can be purchased. Imagine the possibilities of changing shafts quickly and efficiently without harming the shaft. However, interchangeable hosels are nothing new to exchange one shaft for another. What makes the Prophet ICT so unique is the adjustable hosel allows for eight distinct lie and face angle configurations. Not only do you have the ability to change different shafts in seconds with a tool, but one can also fine-tune the angles to provide the best possible combination to help improve accuracy. The hosel adapter can be removed and re-inserted in another position to provide directional help as one’s swing changes. This club can grow with the owner instead of becoming obsolete like so many clubs on the market. The key is the octagonal interchangeable hosel insert will create eight different lie and face angle sets of specifications from upright to flat to open to closed. Add this to the three different loft options and the countless shafts on the market and you have an almost unlimited number of custom-fitting opportunities.
Questions on Dynacraft Prophet ICT Driver - Clubhead
- From amal at 10/30/12 7:29 AM
- From claude allen at 11/12/12 3:39 PM
- How does the apparent added shaft length effect shaft tipping?
- Claude:
On the ICT drivers, the bottom of bore to ground line measurement is the exact same as the majority of drivers on the market today. As such, there is no need to alter tip trimming during assembly. - Do you find this question helpful? Yes No
- From DGN at 3/31/13 10:49 AM
- Dynacraft Prophet ICT Driver: Are additional adjustable adapters available. If so, where and how much?
- We no longer offer additional adapters. We ran out not too long ago and the minimum production run to have them CNC milled is far too great for a closeout item.
- Do you find this question helpful? Yes No
Ask Your Own Question
| Hand | Club | Loft | Lie | Weight | Face Angle | Face Height | Volume | Std Clublength | Hosel ID |
| RH | Driver | 9.5° | Variable | 202 | Variable | 55 mm | 405 cc | 45 in | 0.335" |
| RH | Driver | 10.5° | Variable | 202 | Variable | 55 mm | 405 cc | 45 in | 0.335" |
| RH | Driver | 12° | Variable | 202 | Variable | 55 mm | 405 cc | 45 in | 0.335" |
| LH | Driver | 10.5° | Variable | 202 | Variable | 55 mm | 405 cc | 45 in | 0.335" |
- Related products for you
-
- Dynacraft Logo Headcovers
-
Starting at:
-
- 4mm Allen Screw for Dynacraft ICT Woods
-
Starting at:











































