Orlimar TriMetal Fairway Woods and Hybrids

Customer Service (800) 367-8912     Tech Support (800) 942-5872

Orlimar Golf V18 Driver

$11.95reg $11.95
    2015 Dynacraft Prophet CB Iron - Clubhead
    Model: I3710A

Product Name Price Qty
Dynacraft Prophet CB Iron (RH) #3 - Clubhead
$11.95
In stock
Dynacraft Prophet CB Iron (RH) #4 - Clubhead
$11.95
In stock
Dynacraft Prophet CB Iron (RH) #5 - Clubhead
$11.95
In stock
Dynacraft Prophet CB Iron (RH) #6 - Clubhead
$11.95
In stock
Dynacraft Prophet CB Iron (RH) #7 - Clubhead
$11.95
In stock
Dynacraft Prophet CB Iron (RH) #8 - Clubhead
$11.95
In stock
Dynacraft Prophet CB Iron (RH) #9 - Clubhead
$11.95
In stock
Dynacraft Prophet CB Iron (RH) PW - Clubhead
$11.95
In stock
Dynacraft Prophet CB Iron (RH) GW - Clubhead
$11.95
In stock
Dynacraft Prophet CB Iron (RH) SW - Clubhead
$11.95
In stock
    
  • 0
$0.00


Click on the image above to enlarge

Product Video

Details

The Dynacraft Prophet CB iron is all about enhancing distance and performance featuring Flexface; a thin, special vacuum heat treated high-strength forged 17-4 stainless steel face with variable thickness to push high COR to its maximum limit. The thinner face not only increases ball speed coming off the face, but also allows for improved weight distribution for an ultra-low and deep center of gravity. This results in longer and straighter shots. The stronger lofts work in unison with today’s lightweight and higher launching shafts. Proven head designs work with all skill levels of golfers looking for the utmost performance for their game.

Note: Be extremely careful, bending the hosel may result in damaging the topline. We will not warranty any damage caused by the bending of this product.

Customer Reviews

Items 1 to 25 of 25 total

per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register

    Questions on 2015 Dynacraft Prophet CB Iron - Clubhead

    Sort by Descending
    • From Miles at 10/9/2014 12:13 PM
      • I see this has a high COR face, will it have similar ball speeds and distances compared to the PowerPlay Warp Speed irons which also have a high COR face?
      • Miles,

        These irons will have a hotter face than the Warp Speed irons. We used the same technology as we did in the Dynacraft Driving irons to boost the COR and ball speed.
      • Do you find this question helpful?  Yes   No
    • From Kelly at 10/10/2014 6:12 PM
      • I assume that the entire head is 17-4 steel, rather than just the face plate. Is that right? If so, can this head be bent? (Any time I have tried bending 17-4 steel, it has been very difficult and I have got very little movement from it.)
      • Kelly,

        Just the forged face plate is made from 17-4, while the rest of the body is cast from 431 stainless steel. These are bendable like any cast iron (+/- 2º).
      • Do you find this question helpful?  Yes   No
    • From Robert at 10/13/2014 8:28 AM
      • How much does it cost per club to bend 1 degree flatter?
      • Bob,

        The cost is $4.50 per iron.
      • Do you find this question helpful?  Yes   No
    • From mike at 10/14/2014 9:25 AM
      • When do you expect these to be available ?
      • Mike,

        I think we are looking at early December when they will be in stock.
      • Do you find this question helpful?  Yes   No
    • From Don at 10/20/2014 5:00 PM
      • Is this head considered a compact head, a standard sized head or an oversize head? Can you please give the following specifications - Blade Length; Toe Height, Heel Height, Sole Width and Hosel Length. I am trying to compare this clubhead with another clubhead and the above measurements will be very helpful.

        Don
      • Don,

        I would describe this as midsize. As far as size, giving dimension can be tricky because not everyone measures the same way nor do those specs remain the same for all irons in the set. However, for the 5-iron, the blade length is 80mm, sole width is 23 mm, toe height is 54mm and hosel length is 60mm. Hopefully that will give you a general idea of the size.
      • Do you find this question helpful?  Yes   No

    Ask Your Own Question





    Back to the product page
    Normally ships in 1-2 business days
    Model # Hand Club Loft Lie Weight Offset Bounce Std Clublength Hosel ID UPC
    I3710A-003 RH #3 17° 59.25 d 242 5.8 mm 0 d 39 in 0.370"  
    I3710A-004 RH #4 20° 60 d 249 5.5 mm 1 d 38.5 in 0.370"  
    I3710A-005 RH #5 23° 60.75 d 256 5 mm 2 d 38 in 0.370"  
    I3710A-006 RH #6 26° 61.5 d 263 4 mm 3 d 37.5 in 0.370"  
    I3710A-007 RH #7 30° 62.75 d 270 3 mm 4 d 37 in 0.370"  
    I3710A-008 RH #8 34.5° 63 d 277 3 mm 5 d 36.5 in 0.370"  
    I3710A-009 RH #9 39° 63.5 d 284 2 mm 6 d 36 in 0.370"  
    I3710A-10P RH PW 44° 64 d 291 2 mm 8 d 35.5 in 0.370"  
    I3710A-15A RH GW 49° 64 d 291 2 mm 9 d 35.5 in 0.370"  
    I3710A-20S RH SW 54° 64 d 298 1 mm 12 d 35.25 in 0.370"  
    Shipping Length (inches) Shipping Width (inches) Shipping Height (inches) Shipping Weight (pounds)
    0 0 0 0