Orlimar TriMetal Fairway Woods and Hybrids

Customer Service (800) 367-8912     Tech Support (800) 942-5872

Orlimar Golf V18 Driver

Choose your clubs

  • 52° Wedge
  • Low Qty.
    Available
  • $39.95
  • 56° Wedge
  • In stock
  • $39.95
  • 60° Wedge
  • In stock
  • $39.95
  • Customize options for your clubs

  • Lie Adjustment:
    Note: The bending may create slight marks on the head and will not be considered a defect.
  •     
    • 0
    • 0
    • 0
    $0.00
    $39.95reg $39.95
      Dynacraft Dual Milled CNC Forged Wedge - Clubhead
      Model: IH514


    Click on the image above to enlarge

    Details

    All new design, these Dynacraft forged wedges are dual CNC milled; each to U-grooves that ensures consistency of both groove width and depth and a secondary skim milled face to ensure maximum spin. Special heel sole grind provides versatility allowing for opening up face without causing excessive bounce. Universal hosel bore accepts both parallel and taper tip shafts.

    Customer Reviews

    Items 1 to 25 of 25 total

    per page

      Write Your Own Review

      Only registered users can write reviews. Please, log in or register

      Questions on Dynacraft Dual Milled CNC Forged Wedge - Clubhead

      Sort by Descending
      • From Bob Woodrick at 2/4/2016 7:02 AM
        • What are the differences between this model and the previous Dynacraft CNC milled wedge?
        • Bob,

          This model is a one-piece forged (no welded hosel), a different sole grind with a little more bounce and the hosel allows the usage of taper tip or parallel tip shafts.
        • Do you find this question helpful?  Yes   No
      • From Duane Town at 2/14/2016 8:39 AM
        • When are these wedge heads going to be back in stock?
          Thanks,
          Duane
        • Duane,

          Our first shipment is scheduled to arrive at the end of this week.
        • Do you find this question helpful?  Yes   No
      • From JAMES HEYER at 2/14/2016 7:51 PM
        • How does the universal hosel allow you to use either parallel or taper tip shafts?
        • James,

          There is a secondary bore that allows the taper tip shaft to seat slightly further down in the hosel and center it than the parallel tip shaft.
        • Do you find this question helpful?  Yes   No
      • From brad hotchkiss at 2/26/2016 7:50 AM
        • Is this wedge v grove usga legal thanks
        • Brad,

          While we have not submitted them to the USGA, the grooves are CNC milled to be conforming as well as the skim milling operation on the face. The grooves do not have to be V-groove to conform.
        • Do you find this question helpful?  Yes   No
      • From Randy Robbins at 2/26/2016 8:09 AM
        • Are these bendable to customize loft, say from 56 to 54?
        • Randy,

          The wedges are very bendable, however we do not offer the service of bending for loft like we do for lie. A local shop can do that for you.
        • Do you find this question helpful?  Yes   No

      Ask Your Own Question





      Back to the product page
      Normally ships in 1-2 business days
      Model # Hand Club Loft Lie Weight Offset Bounce Std Clublength Hosel ID UPC
      IH514-052 RH 52° Wedge 52° 64 d 300 1.8 mm 12 d 35.25 in Universal 0.355"T / 0.370"  
      IH514-056 RH 56° Wedge 56° 64 d 300 0 mm 14 d 35.25 in Universal 0.355"T / 0.370"  
      IH514-060 RH 60° Wedge 60° 64 d 300 0 mm 8 d 35.25 in Universal 0.355"T / 0.370"  
      Shipping Length (inches) Shipping Width (inches) Shipping Height (inches) Shipping Weight (pounds)
      8.5 5.3 1.8 0.9
        Related products for you