Orlimar Practice Golf Balls

Customer Service (800) 367-8912     Tech Support (800) 942-5872

Orlimar Golf Mats

29 Item(s)

  • Grid 
  • List 
  • Set Descending Direction
    per page
    1. 48" Aluminum Club Length Ruler

      Model# MH162994

      48" Aluminum Club Length Ruler

      $9.95
      Sturdy 48" aluminum ruler with measurements printed on both edges. Learn More
    2. 8.6mm Drill Bit (for 0.335" bore)

      Model# MIT018-001

      8.6mm Drill Bit (for 0.335" bore)

      $9.95
      Use this bit to clean out and/or make hosel bore the correct size. Fits 0.335" standard parallel wood bore. Learn More
    3. 9.4mm Drill Bit (for 0.370" bore)

      Model# MIT019-001

      9.4mm Drill Bit (for 0.370" bore)

      $9.95
      Use this bit to clean out and/or make hosel bore the correct size. Fits 0.370" standard parallel iron bore. Learn More
    4. Apollo Adjustable Putter Shaft Replacement Wrench

      Model# W19A

      Apollo Adjustable Putter Shaft Replacement Wrench

      $5.95
      This is a replacement wrench for tightening/removing the Apollo Adjustable Belly and Long putter shaft. Learn More
    5. Carbon Steel Hand Hacksaw Blade

      Model# GEB-001

      Carbon Steel Hand Hacksaw Blade

      $0.95
      Non-serrated hacksaw blade is an inexpensive solution to cutting graphite shafts without splintering. Fits 10” hacksaw frame. Half inch wide and 18 teeth per inch. Learn More
    6. Digital Calipers

      Model# MIT047-001

      Digital Calipers

      $39.95
      Electronic Digital Calipers makes it easy to accurately read measurements in inches or millimeters for shaft tip and butt diameters, grip sizing, hosel depth and outside diameters. A must for every clubmaking shop! LED readout with battery and protective case included. Learn More
    7. Dynacraft Bench Ruler Soleplate

      Model# DBRPLATE

      Dynacraft Bench Ruler Soleplate

      $24.95
      The Dynacraft Bench Ruler Soleplate works in unison with a standard 48” aluminum ruler (sold separately) to measure club length without having to set the club in the playing position. Takes up minimal space and can be screwed onto your workbench. Simply slide edge of ruler inside slot, lay club face down with shaft centered on ruler and rest sole against the vertical pin. Measures both RH and LH golf clubs and works for all clubs including woods, hybrids, irons, wedges and putters. Learn More
    8. Dynacraft Bench Ruler Soleplate Kit

      Model# DBRPLATE-KIT

      Dynacraft Bench Ruler Soleplate Kit

      $33.95
      The Dynacraft Bench Ruler Soleplate Kit works in unison with a standard 48” aluminum ruler (included) to measure club length without having to set the club in the playing position. Takes up minimal space and can be screwed onto your workbench. Simply slide edge of ruler inside slot, lay club face down with shaft centered on ruler and rest sole against the vertical pin. Measures both RH and LH golf clubs and works for all clubs including woods, hybrids, irons, wedges and putters. Learn More
    9. Dynacraft Blade Style Grip Remover

      Model# GRT

      Dynacraft Blade Style Grip Remover

      $21.95
      A handy item to have in any sized shop, this tool removes most grips for re-use. Didn't cut the shaft short enough? Need to add a counterweight? The grip wasn't aligned straight? These are just some of the reason why you would need to save what could be an expensive grip or one that's still in good condition. Offset handle and sturdy blade makes quick work along with a little solvent. Much safer alternative as there are no needles to worry about to safely remove grips. Learn More
    10. Dynacraft Golf Groove Sharpener Tool - Blue

      Model# DYGROOVE-BLUE

      Dynacraft Golf Club Groove Sharpener Tool Blue with 6 Cutter Stainless Steel Head - Improved Backspin and Ball Control

      $12.95
      Sharpen, clean and extend the life of your golf clubs with the Dynacraft Golf Groove Sharpener. The Dynacraft Golf Groove Sharpener Tool is designed to provide optimal back spin and control with your irons and wedges. Once you have removed any grass and dirt from grooves with water / soft bristled brush, run this tool down each groove 2 or 3 times with the appropriate cutter tip and within minutes your worn grooves will be revitalized. The 6 cutter head is made of high grade stainless steel and comes equipped with 3 U-shaped tips and 3 V-shaped cutter tips. Comes in a protective storage case and easily stores in your bag. Color: Red, Blue, Silver and Gold. Material: Stainless Steel Learn More

    29 Item(s)

  • Grid 
  • List 
  • Set Descending Direction
    per page