2015 Garmin GPS Golf Rangefinders

Customer Service (800) 367-8912     Tech Support (800) 942-5872

2015 Garmin GPS Golf Rangefinders

16 Item(s)

  • Grid 
  • List 
  • Set Descending Direction
    per page
    1. 8.6mm Drill Bit (for 0.335" bore)

      Model# MIT018-001

      8.6mm Drill Bit (for 0.335" bore)

      $6.95
      Use this bit to clean out and/or make hosel bore the correct size. Fits 0.335" standard parallel wood bore. Learn More
    2. 9.4mm Drill Bit (for 0.370" bore)

      Model# MIT019-001

      9.4mm Drill Bit (for 0.370" bore)

      $6.95
      Use this bit to clean out and/or make hosel bore the correct size. Fits 0.370" standard parallel iron bore. Learn More
    3. Apollo Adjustable Putter Shaft Replacement Wrench

      Model# W19A

      Apollo Adjustable Putter Shaft Replacement Wrench

      $5.95
      This is a replacement wrench for tightening/removing the Apollo Adjustable Belly and Long putter shaft. Learn More
    4. Hook Blade Knife

      Model# MIT051-001

      Hook Blade / Utility Knife

      $9.95
      Combo knife takes either straight or hooked knife blades. Includes 2 heavy duty straight blades and 5 hook blades. The hook blades are ideal for cutting off grip safely even on graphite shafts. Learn More
    5. Red Egyptian Cloth Ferrule Dressing Belt - 1" X 42"

      Model# MIT014-001

      Red Egyptian Cloth Ferrule Dressing Belt - 1" X 42"

      $3.95
      Replacement belt for 1" x 42" belt sanders. This belt is perfect for turning down ferrules flush with the top of the hosel. Learn More
    6. Replacement Deburring Rolls

      Model# SDRR

      Replacement Deburring Rolls

      Starting at: $4.95

      Set of 5 replacement rolls for use with SDRM Spirl Deburring Mandrel. Use in drill to clean out hosels after re-shafting or prior to assembly for best bond. Learn More
    7. Replacement Hook Blades

      Model# MIT052-001

      Replacement Hook Blades

      $3.95
      These are replacement hooked knife blades for standard utility knives. These are available 5 to a pack. Learn More
    8. Replacement Needle

      Model# MIT028-001

      Replacement Needle

      $3.95
      Loosens the grip for easy removal by injecting solvent through needle Working in conjuction for Grip Remover Gun and needle-save hose. Ships with 1 needle. Learn More
    9. Rod Saw Blade

      Model# GG12-50T

      Rod Saw Blade

      $4.50
      The ideal tool to cut graphite and composite shafts safely and efficiently with the long-lasting tungsten carbide cutting edge. Fits any standard 12" hacksaw frame. TIP: Wrap the shaft with making tape where you want to cut, mark the tape and cut along the mark to prevent fraying or splintering. Learn More
    10. Rubber Vise Clamp

      Model# RAVC-001

      Rubber Vise Clamp

      $2.20
      Rubber Vice Clamp is used with a vice to protect the shaft and hold the club securely in place during assembly and disassembly procedures. Learn More

    16 Item(s)

  • Grid 
  • List 
  • Set Descending Direction
    per page