Orlimar TriMetal Fairway Woods and Hybrids

Customer Service (800) 367-8912     Tech Support (800) 942-5872

Orlimar Golf V18 Driver

$16.95reg $16.95
    Graphite Design G-Tech Iron Golf Shafts
    Model: GDGTECH-I

Product Name Price Qty
Graphite Design G-Tech Graphite - Iron A/L
$16.95
Low Qty.
Graphite Design G-Tech Graphite - Iron R/S
$16.95
In stock
    
  • 0
$0.00


Click on the image above to enlarge

Product Video

Details

The combination flexes, A/L and R/S, gives the club builder a wide array of options for the golfer. The playability of G-Tech will out shine the competition in this category on every level. The G-Tech line compliments the quality and performance reputation that Graphite Design is famous for.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Questions on Graphite Design G-Tech Iron Golf Shafts

Sort by Descending
  • From Rich at 3/3/2015 11:40 AM
    • When shopping for graphite shafts for my hybrids, am I looking for shafts designated specifically for hybrids, or can those designated as "irons" and "woods" be used also? Trying to stay at $20 or less, and am looking at the Graphite Design G-Tech. Thanks
    • Rich,

      You don't have to use hybrid-specific shafts for hybrids. Just match the tip diameter of the shaft to the head and tip trim based on the weight of the head rather than the number engraved on the sole. Many times, hybrids will weigh less than a corresponding iron number. For example, if a #3 hybrid weighs the same as a 2-iron (236g), then tip trim the shaft as a 2-iron (assuming a 0.370" shaft).
    • Do you find this question helpful?  Yes   No
  • From Dan Bowen at 9/23/2016 10:16 AM
    • What is the difference in the G-Tech shaft and the 73,83,and 93 Graphite Design iron shafts. Also what is the difference in the 73.83,and 93 shaft. is it just the weight or kick point.
      Thank you.
    • Dan,

      The G-Tech is more of an entry level or price point shaft in the Graphite Design line. The G-Series irons use better quality materials and the ball flight will be slightly lower than with the G-Tech. The main difference between the 73, 83 and 93 is weight although you might see a minor difference in trajectory in like flexes amongst them.
    • Do you find this question helpful?  Yes   No

Ask Your Own Question





Back to the product page
Model # Weight Flex Torque Butt Diameter Tip Diameter Raw Length Ball Flight Parallel Tip Trim Code UPC
GDGTECH-001-IAL 77 A/L 3.5 d 0.592 in 0.370" Parallel 41 in Mid-High 6 in L: IH6 / A: IH20  
GDGTECH-001-IRS 80 R/S 3.5 d 0.600 in 0.370" Parallel 41 in Mid-High 6 in R: IH6 / S: IH20  
Shipping Length (inches) Shipping Width (inches) Shipping Height (inches) Shipping Weight (pounds)
48 4 4 2