Straight taper ID-controlled for over-hosel putters. Hireko carries two Controlled I.D. shafts from True Temper for the growing number of putters designed with a post. There is a 38" straight stepless model (code USTPO-38) and a 35" straight stepped model (code UCA9160PO-35) to choose from. The USTPO-38 has an I.D. of 0.328" and the UCA9160PO-35 has an I.D. of 0.324".
Questions on True Temper Straight Stepless ID-Controlled Putter
- From Jason at 6/14/16 10:42 AM
- Will this shaft work with the Dynacraft Hindsite putter head?
It can, but the better of the two would be the UCA9160PO-35, which will be a tighter fit. The OD of the stem of the Hindsight putter is @ 0.320" and the UCA9160PO-35 has an ID of 0.324" versus 0.328" for this shaft.
- Do you find this question helpful? Yes No
Ask Your Own Question
|Model #||Weight||Flex||Torque||Butt Diameter||Tip Diameter||Raw Length||Ball Flight||Parallel Tip||Trim Code||UPC|
|USTPO38-001||122||0.600 in||0.370" Parallel||38 in||IH19|
|Shipping Length (inches)||Shipping Width (inches)||Shipping Height (inches)||Shipping Weight (pounds)|
- Related products for you