Intech Crossbar Golf Travel Support Rod

Customer Service (800) 367-8912     Tech Support (800) 942-5872

New 2018 Hireko Golf Accessories

$4.00reg $4.00
    Apollo Standard Stepless Steel Golf Shafts
    Model: APMSS

Product Name Price Qty
Apollo Standard Stepless Steel - Wood R/S
In stock
Apollo Standard Stepless Steel - Iron R/S
In stock
  • 0

Click on the image above to enlarge


The Apollo Standard Stepless Steel offers a high end look at value pricing. Offered in popular R/S combination flex.

Customer Reviews

Items 1 to 25 of 25 total

per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register

    Questions on Apollo Standard Stepless Steel Golf Shafts

    Sort by Descending
    • From Dave Keefe at 3/28/2016 7:30 AM
      • How would you compare Apollo Stepless R to Dynamic R300 for cut weight - ball flight- tip stiffness

        Looking for heavy weight steel similar to R300

        Seem close using DFSI info - but would play Apollo 5I at 37.5" - same as as R300

      • Dave,

        From a weight and frequency standpoint, the two shafts (in parallel tip R-flex) are comparable. The Dynamic Gold will be a little stiffer in the tip launching the ball slightly lower of the two shafts, but it won't be a night and day difference.
      • Do you find this question helpful?  Yes   No
    • From Jason at 3/28/2016 7:02 PM
      • Hey how is it going? I recently purchased these shafts to put in in my driver and 5,7,9,11 super concord woods. I play x100 in my irons and was wonder if I could tip these an extra inch to get them to play a little stiffer? I will be playing the driver at 43 inches and the rest of the lengths with be cut accordingly. I love your stuff and your site. Thanks
      • Jason,

        There is 10.5" of parallel tip length, so there will be plenty of length to tip trim extra and you should have ample length left over to achieve standard lengths. Make sure to weigh the heads and trim them according to the tip trim tables based on their weight (plus you extra 1" to stiffen them up).
      • Do you find this question helpful?  Yes   No
    • From Mike at 6/22/2016 11:20 AM
      • Will you be getting the Apollo Hump shafts back in the future?
      • Mike,

        I am afraid you won't see these coming back anytime soon.
      • Do you find this question helpful?  Yes   No
    • From Fredrik at 8/16/2017 2:14 AM
      • Hi,
        I tested my buddy's Mizuno MP52's with a Project x Rifle shaft that he called "Regular+" and they felt very good, would this shaft be similar if trimmed to Firm-regular? (or what do you recommend?)

      • Fredrik,

        The R+ can be considered as a "firm" flex. However, it is important to realize there are no standards for flex meaning that firm flex may be a stiff flex in another shaft or brand. Usually a Project X or Rifle shaft will have a flex of 5.5, 6.0, 6.5 etc. Did this shaft have such a marking on the label?
      • Do you find this question helpful?  Yes   No
    • From Fredrik at 8/18/2017 5:36 AM
      • I think it it said 5.5 on the label
      • Fredrik,

        OK, 5.0 should be the R+ where as 5.5 would have been S flex. If you are trying to match the frequency (flex) with the Apollo Standard Stepless, cut half-way between the R and S flex and it will be very close. Note, not all shafts will work out the same as there is no industry standard for flex.
      • Do you find this question helpful?  Yes   No

    Ask Your Own Question

    Back to the product page
    Model # Weight Flex Torque Butt Diameter Tip Diameter Raw Length Ball Flight Parallel Tip Trim Code UPC
    APMSS-001-WRS 135 R/S   0.600 in 0.335" Parallel 46 in Mid 10.5 in R: W1 / S: W2 852674727703
    APMSS-001-IRS 125 R/S   0.600 in 0.370" Parallel 41 in Mid 9.5 in R: IH6 / S: IH1 852674727697
    Shipping Length (inches) Shipping Width (inches) Shipping Height (inches) Shipping Weight (pounds)
    48 4 4 2
      Related products for you