Orlimar Cart Trakker 3 Wheel Golf Cart

Customer Service (800) 367-8912     Tech Support (800) 942-5872

Intech Golf Balls

25 Item(s)

  • Grid 
  • List 
  • Set Descending Direction
    per page
    1. Apollo CWS Steel Tapered

      Model# APMCWST

      Apollo CWS 0.355" Taper Tip Steel Iron Golf Shafts

      Starting at: $4.95

      Designed for the more advanced players who desire to produce tour trajectory type golf shots, Apollo's new CWS (Constant Weight Steel), taper tip iron shafts have a firm tip section which produces the piercing trajectory favored by the best players. Each shaft within the set weighs the same due to the constant weight design providing greater shaft consistency. This results in superior distance control and a tighter shot dispersion, especially in the scoring clubs where the constant weight concept is needed most. Each shaft is manufactured to exacting weights and balance point positions to ensure consistent flex matching through the set. Constant Weight is a shafting concept in which all of the shafts in a given set of irons will weigh the same regardless of their length. This does not occur with unitized, parallel tip shafts or even certain taper tip shafts that start out as a master shaft, tip trimmed to increase the stiffness and then swaged to form the tapered tip section. As more material is tip trimmed, the shaft becomes progressively lighter the shorter the shaft. Learn More
    2. Nippon N.S. Pro 1100 0.370" Parallel Tip Steel Iron Golf Shafts

      Model# 353093

      Nippon N.S. Pro 1100 0.370" Parallel Tip Steel Iron Golf Shafts

      Starting at: $19.95

      These are brand new and original Nippon N.S. Pro 1100 steel shafts. Lightweight (109.5 grams) and mid-launching, these were designed as the stock steel shaft for the Callaway Diablo forged iron. 0.370" parallel tip. Learn More
    3. Nippon N.S. Pro 900XH Taper Tip Steel Shaft

      Model# C2786

      Nippon N.S. Pro 900XH 0.355" Taper Tip Steel Iron Golf Shafts

      Starting at: $19.95

      The Nippon Shaft’s N.S. Pro 900XH steel shafts weigh a mere 90 grams. Though 35 grams lighter than the standard 125-gram steel shaft, the N.S. Pro 900XH provides the stability and consistency normally found in heavier shafts; yet its lightweight qualities enable golfers to increase their swing speeds, helping them add distance and reduce stress on the body. These were designed as the stock shaft for select Cobra irons. Learn More
    4. Odyssey Rossi Double Bend Fluted Putter Shaft

      Model# R507505

      Odyssey Rossi Double Bend Fluted Putter Shaft

      $19.95
      These are brand new and original Odyssey putter shafts. This was the stock putter shaft found in the Odyssey Rossi putters requiring the double bend shaft. Great for repairs for broken shafts in this particular head model. Original shaft model ODUYESBG-37. Learn More
    5. Project X Flighted 95 Parallel Tip Steel Iron Golf Shafts

      Model# 35359

      Project X Flighted 95 Parallel Tip Steel Iron Golf Shafts

      Starting at: $19.95

      Lightest shaft in the Project X family delivering maximum distance! Ultimate blend of shot-making control & power. Mid-flight design delivers optimized ball flight for a wide range of golfers. These were the stock steel shafts in the Callaway X Hot Pro irons. Learn More
    6. Project X Flighted 95 Taper Tip Steel Iron Golf Shafts

      Model# PX95F

      Project X Flighted 95 Taper Tip Steel Iron Golf Shafts

      Starting at: $37.99

      Lightest shaft in the Project X family delivering maximum distance! Ultimate blend of shot-making control & power. Mid-flight design delivers optimized ball flight for low-to mid trajectory golfer. Descending weight properties provide enhanced feel in the mid to short irons. 0.355" taper tip only. Available in iron flexes: 5.0, 5.5, 6.0, 6.5 Learn More
    7. Project X Flighted Parallel Tip Steel Iron Golf Shafts

      Model# UPROJXF

      Project X Flighted Parallel Tip Steel Iron Golf Shafts

      Starting at: $26.99

      RIFLE features a different constant taper per inch for each shaft in the set resulting in more energy transfer to the ball. The ball gets up faster and flattens out for a penetrating trajectory. Flighted technology features a change in kick point within each shaft throughout the set. Long irons provide a lower kick point for higher ball flight and easier launch while the short irons have a higher kick point for a lower trajectory and greater control. Learn More
    8. Project X Flighted Taper Tip Steel Iron Golf Shafts

      Model# PROJXF

      Project X Flighted Taper Tip Steel Iron Golf Shafts

      Starting at: $32.99

      RIFLE features a different constant taper per inch for each shaft in the set resulting in more energy transfer to the ball. The ball gets up faster and flattens out for a penetrating trajectory. Flighted technology features a change in kick point within each shaft throughout the set. Long irons provide a lower kick point for higher ball flight and easier launch while the short irons have a higher kick point for a lower trajectory and greater control. Fits 0.355 taper tip irons. Learn More
    9. Project X Parallel Tip Steel Iron Golf Shafts

      Model# UPROJX

      Project X Parallel Tip Steel Iron Golf Shafts

      Starting at: $24.99

      Project X features a different constant taper per inch for each shaft in the set resulting in more energy transfer to the ball. The ball gets up faster and flattens out for a penetrating trajectory. Learn More
    10. Project X PXi Parallel Tip Steel Golf Shaft

      Model# 353616405

      Project X PXi Parallel Tip Steel Golf Shaft - (6.5) X Flex

      $19.95
      Tour-caliber spin control and tip stability which are hallmarks of the Project X family, available in a lighter weight version to provide for a smoother feel and increased ball speed. These were the stock steel shafts in the Callaway X Utility Prototype Irons. 0.370" parallel tip Learn More

    25 Item(s)

  • Grid 
  • List 
  • Set Descending Direction
    per page