Bringing together tradition with modern game improvement technology, each Dynacraft Prophet CNC iron starts out as a solid billet of soft 1020 carbon steel. Through a new concept in production techniques, the head goes through a series of several steps where the clubhead is stamped and pressed into a raw, overweight forged blade. Next a computer numerically controlled (CNC) program precisely mills the back of the blade into the exact cavity shape. The milling doesn't stop there as an additional step creates an undercut cavity to allow for a deeper weight distribution found only in cast designs until now! Afterwards, the heads are polished by hand, buffed and chrome plated to provide the treatment of a lifetime. Come see first hand how all game-improvement forged irons will be produced in the future.
Questions on Dynacraft Prophet CNC Forged Iron - Clubhead
- From MORT at 5/8/14 1:56 PM
- You don`t make the same number of each head and if so did you sell individual 5,7 and 8s tell you have only some heads and not others? All your forged heads don`t have full sets available. Tough to buy partial sets
This line was retired at the end of last year and we are simply selling the remaining pieces at a reduced price. The same head (with a different milling pattern in the back) can be found in the Acer XS Forged. We have the full complement of irons in that set.
- Do you find this question helpful? Yes No
Ask Your Own Question
|Model #||Hand||Club||Loft||Lie||Weight||Offset||Bounce||Std Clublength||Hosel ID||UPC|
|FI1006A-003||RH||#3||21°||59 d||242||5.3 mm||0 d||39 in||0.370"|
|FI1006A-004||RH||#4||24°||59.5 d||249||4.8 mm||1 d||38.5 in||0.370"|
|FI1006A-006||RH||#6||31°||60.5 d||263||3.8 mm||3 d||37.5 in||0.370"|
|FI1006A-009||RH||#9||43°||62 d||284||2.3 mm||6 d||36 in||0.370"|
- Related products for you
- Dynacraft DMC Forged Wedge - Clubhead