Print This Page
Brand:
Hireko
Located in:
Club Components, Golf Tools and Supplies
Plumbers Neck Putter Adapter:These precision cast, stainless steel adapters are designed to fit virtually any putter with a 0.370 in. parallel bore 90d socket and transform it into an entirely different putter regardless of manufacturer. Each has an attractive neutral bead blast finish and three styles to choose from. Directions: Simply test fit stem into the putter? socket as it should be a tight fit. If it does not fit, lightly hand sand stem until it is snug. Apply quick setting epoxy to stem, seat and align adapter and allow the epoxy to harden. Lastly, install the new shaft ?it? that simple!
The Plumbers Neck adapter converts a RH putter designed to have a compound triple bent shaft with the proper lie/offset and accept a straight shaft. Weighs 44g. Creates a 72 degree lie angle.
The Plumbers Neck adapter converts a RH putter designed to have a compound triple bent shaft with the proper lie/offset and accept a straight shaft. Weighs 44g. Creates a 72 degree lie angle.
Plumbers neck putter adapter
By Smiles
from Tucson, AZ on 4/7/2008
from Tucson, AZ on 4/7/2008
Pros:
Easy To Use
Cons:
None, very easy to use.
Best Uses:
At Home
Describe Yourself:
Golf Enthusiast
Handicap:
12 - 15
Bottom Line:
Yes, I would recommend this to a friend
Comments about Hireko H003:Plumbers Neck Putter Adapter:
What a handy item to have in the shop. Makes adapting any putter a breeze. Glad I found it.
JUNK!
By Just Puttin Round, LLC. from Bolton, CT. on 4/7/2008
from Bolton, CT. on 4/7/2008
Pros:
Good idea
Cons:
Shaft hole too big
Best Uses:
Dumpster
Describe Yourself:
Tournament Golfer
Bottom Line:
No, I would not recommend this to a friend
Comments about Hireko H003:Plumbers Neck Putter Adapter:
Shaft hole diameter is roughly drilled to .375"+;
The hole should be reamed to .371" dia for a .370
dia shaft; epoxy won't hold. Other end of this
part is larger than .370 and won't fit into clubs
with .370 dia., and is out of round.