Golf-Tools-and-Supplies
» Golf-Tools-and-Supplies (44)
Featured Products
All Product Reviews > Club-Components > Golf-Tools-and-Supplies
 
Grip Tape 2" x 36yds:Double-sided solvent based grip tape
 
Epoxy A+B 4 oz Bottles:Two part A/B epoxy. Mix 1:1 ratio. Sets in 3 hrs, cures in 24 hours
 
Grip Solvent:Non-flammable, non-toxic solvent for gripping
 
Vice Clamp:Rubber Vice Clamp is used with a vice to protect the shaft and hold the club securely in place...
 
Hosel Brushes:Remove old epoxy and debris from inside the hosel
 
Water Activated Pip Strip:Pre-cut, individual 2 inch wide by 10 inch long strips of water activated...
 
Total Clubfitting in the 21st Century Book:Includes the latest information related to fitting each and...
 
Grip Remover Gun:Loosens the grip for easy removal by injecting solvent through a needle.
 
Grip Tape 3/4" x 36yds:Double-sided solvent based grip tape
 
Ferrule - Silver Ring:Ferrule - Silver Ring Sold 12 per package.
 
Fast Setting Shafting Epoxy:Beats any tour van epoxy we have tested in strength. This epoxy provides...
 
Taylor Made R9 Adjustable Sleeve:Replaces adjustable sleeve on R9 models. Fits either 0.335" or...
 
Counterweights:The overall balance of a golf club is very important to achieve the optimal results by...
 
The Ferrule Block:The Ferrule Block is more than just a fast, efficient way of installing ferrules onto...
 
Clublength Ruler Sole Plate:Attaches to Clublength Ruler to measure clublength without having to set...
 
Ferrule - Black 1/2 in.:Ferrule - Black 1/2 in.Sold 12 per package.
 
Aluminium Shaft Extenders:Shaft Extenders fit into the butt of the existing shaft and underneath the...
 
Long-Broomstick Putter Adapter:These precision cast, stainless steel adapters are designed to fit virtually...
 
The Modern Guide to Clubmaking 4th Edition Book:This best selling clubmaking book explains in detail...
 
Steel Shaft Extenders:Shaft Extenders fit into the butt of the existing shaft and underneath the grip...
 
Shaft Conversion Ferrule .350/.335:Many OEM clubheads have a non-standard 0.350" hosel bore. The...
 
Graphite Shaft Extenders:Shaft Extenders fit into the butt of the existing shaft and underneath the grip...
 
4mm Allen Wrench for Dynacraft ICT Woods:4mm allen wrench for 4mm ICT allen screw.
 
Plumbers Neck Putter Adapter:These precision cast, stainless steel adapters are designed to fit virtually...
 
Shaft Extenders:Shaft Extenders fit into the butt of the existing shaft and underneath the grip to extend...
 
Callaway Conversion Ferrule:Reshafts VFT, ERC II, Great Big Bertha II, or Steelhead III with 0.335 inch...
 
Spiral Deburring Roll and Mandrel:Use in drill to clean out hosels afer reshafting or prior to assembly...
 
Groove Tool:The groove tool is an aluminum disk with a triangular carbide insert which cleans grooves....
 
Ferrule - Black 1/8 in.:Ferrule - Black 1/8 in.Sold 12 per package.
 
Slant Hosel Putter Adapter:These precision cast, stainless steel adapters are designed to fit virtually...
 
Pro Plus Graphite Shaft Puller:STEELCLUB® Graphite Shaft Pullers now offer even better performance....
 
Hook Blade Knife:- Ergonomically Designed- Heavy Casting For Firm Grip- Magnets Hold Blade When Opening...
 
Clublength Ruler:48" aluminum ruler with unique graphic layout. Measurements printed on both edges...
 
Shafting Beads:Aligns, centers and cushions shaft. Eliminates off-center shafts and un-even bonds. Add...
 
Rattle Stop:Eliminates head rattles by trapping loose debris. Put a few drops inside the hosel and allow...
 
TaylorMade / Ping Conversion Ferrule:Fits TaylorMade R7 / R5 / New Burner / Superquad plus Ping G2, G5,...
 
9.4mm Drill Bit (for 0.370" bore):Use this bit to clean out and/or make hosel bore the correct size....
 
Dynacraft T-Handle T20 Torx Wrench:Wrench for tightening/removing T20 TORX-type screw such as that in...
 
Ferrule - Black 3/4 in.:Ferrule - Black 3/4 in.Sold 12 per package.
 
Ferrule - Red Ring:Ferrule - Red Ring Sold 12 per package.
 
Weight Plugs:Weight plugs are inserted into the tip of the shaft at the hosel area to provide additional...
 
Screws & Wrench:These allen weight screws fit the Dynacraft Genesis and Power Play System Q line...
 
 
4mm Allen Weight Screw - 12 gram:These 4mm allen weight screws are designed to fit Power Play, Acer and...
Powered by PowerReviews
Copyright © 2011 Hireko Golf All Rights Reserved. Do not republish contents.