Pride Professional Tee System Golf Tees

Customer Service (800) 367-8912     Tech Support (800) 942-5872

Champ Zarma Tour Slim-Lock Golf Spikes

$22.95reg $22.95
    Power Play System Q Hybrid - Clubhead
    Model: I358

Product Name Price Qty
Power Play System Q Hybrid Iron (RH) #2 - Clubhead
$22.95
In stock
Power Play System Q Hybrid Iron (RH) #5 - Clubhead
$22.95
In stock
Power Play System Q Hybrid Iron (RH) #8 - Clubhead
$22.95
Low Qty.
Power Play System Q Hybrid Iron (RH) PW - Clubhead
$22.95
In stock
Power Play System Q Hybrid Iron (RH) SW - Clubhead
$22.95
In stock
Power Play System Q Hybrid Iron (LH) #2 - Clubhead
$22.95
In stock
Power Play System Q Hybrid Iron (LH) #4 - Clubhead
$22.95
In stock
Power Play System Q Hybrid Iron (LH) #5 - Clubhead
$22.95
In stock
    
  • 0
$0.00


Click on the image above to enlarge

Details

The tri-port weighting system not only allows for a lower, deeper center-of-gravity and increased MOI, but the three interchangeable weighted screws may be configured for variable swingweights, lengths or to encourage straight, draw, or fade trajectory with additional screws (sold separately). Now available through SW to replace your entire set of irons.

Comes preconfigured with three 6-gram weights in each port.

Customer Reviews

Items 1 to 25 of 25 total

per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register

    Questions on Power Play System Q Hybrid - Clubhead

    Sort by Ascending
    • From William Salzman at 4/21/16 4:44 PM
    • From Christopher West at 12/27/15 11:49 AM
      • Do these conform to the rules of golf?
      • Christopher,

        The answer is both yes and no. These are an older model that was produced long before the 2010 groove rule was even drafted. When we submitted these heads, they did conform to the Rules of Golf at the time and would in effect be grandfathered in. The only exception would be when the Condition of Competition is in effect, which few golfers compete under.
      • Do you find this question helpful?  Yes   No
    • From Paul at 5/4/15 3:12 PM
      • Hi,
        Are these heads conforming? I saw on the q&a that one of your other hybrids wasnt. Thanks
      • Paul,

        At the time we submitted them prior to Jan 1, 2010, they did come back as conforming to the Rules of Golf. With the change in the groove rule, I doubt they would pass the more stringent standard for those that play under the Condition of Competition. The Power Play Select 5000 was the other hybrid you were thinking about that did not come back with a conforming ruling.
      • Do you find this question helpful?  Yes   No
    • From Gary Paul at 4/4/15 11:17 AM
      • What does it mean to have negative offset numbers?
      • Gary,

        This means they have a face forward design like a fairway wood. Offset is the amount how far forward the leading edge of the hosel is ahead of the leading edge of the face. A negative number shows how far behind the leading edge of the hosel is compared to the leading edge of the face.
      • Do you find this question helpful?  Yes   No
    • From Chris at 3/14/15 9:11 AM
      • I have a Acer XS Pro iron 6-PW with FST 115 Steel R-flex (recommended length i6-37,5 club "). Now I want to make a Power Play System Q Hybrid #3, #4 and #5 of the same FST 115 Steel R- fex shafts. How long should these hybrids? H #5 should be 38" or 39" in length, or perhaps still others long? I do not want to be too small or too large difference in distance between i6 and H5.
      • Chris,

        The #5 hybrid in the System Q is recommended to be 39" with steel as the weight is 244g. That is essentially the weight of a 3-iron and thus should be tip trimmed as a 3-iron. If you want a shorter length, this will require heavier screws. The screws for the new Acer XV will fit with the heaviest weight being 12g. The screw inside the System Q are 6g so you would need to replace two 6 gram screws with two 12 grams screws so you can make the club 1" shorter and closer to the assembly length you want.
      • Do you find this question helpful?  Yes   No

    Ask Your Own Question





    Back to the product page
    Model # Hand Club Loft Lie Weight Offset Bounce Volume Std Clublength Hosel ID UPC
    I358-002-16 RH #2 16° 60 d 224 -3 mm 0 d 115 cc 41 in 0.370"  
    I358-005-25 RH #5 25° 62 d 245 -6.5 mm 0 d 100 cc 39.5 in 0.370"  
    I358-008-37 RH #8 37° 63.5 d 266 -9.5mm 0 d 90 cc 38 in 0.370"  
    I358-0PW-45 RH PW 45° 64 d 280 -11.5 mm 0 d 90 cc 37 in 0.370"  
    I358-0SW-55 RH SW 55° 64 d 294 -13.5 mm 7 d 90 cc 36 in 0.370"  
    IL358-002-16 LH #2 16° 60 d 224 -3 mm 0 d 115 cc 41 in 0.370"  
    IL358-004-22 LH #4 22° 61 d 238 -5.5 mm 0 d 105 cc 40 in 0.370"  
    IL358-005-25 LH #5 25° 62 d 245 -6.5 mm 0 d 100 cc 39.5 in 0.370"  
    Shipping Length (inches) Shipping Width (inches) Shipping Height (inches) Shipping Weight (pounds)
    0 0 0 0
      Related products for you