| Author |
Message |
|
|
gwb@ncats.net
Joined: Mar 5, 2006
Messages: 10
Offline
|
customer wants steel A flex instead of graphic in his irons I have them Sw#from PW(D0) down to 3I(C The weight of the clubs are PW 16 3/4 ozdown to 3I at 15 oz and the total gms of heads with weight adjusted in 7 degrees differences,but the 5I it is the same weight as the 6I at 15 1/2 and it is 5grams lighter than the targeted weight of273 grams. If I add the 5gms it will raise the SW# up 3points and willmake the over all head weight heavierthan the 6I. Am I trying to get to techical on the set? the customer is an older man and wants set with A flex and cut to women lengths. Is it possibly that one of my shafts was not the same weight as the other 7?
|
|
|
 |
|
|
lazzal@nu-world.com
Joined: May 9, 2006
Messages: 1
Offline
|
We weigh the shafts before we make up a set---Of course we weigh the clubheads also---Foundries make mistakes----
We place the heavier shafts in the shorter clubs if there is a difference in the set ---We add weight to adjust swing weight only, not to adjust completed overall club weight--
|
Started in 1947, still own the equipment---Active some??? |
|
|
|
|
|
Register
Login
