| Author |
Message |
|
|
hey_kuya@yahoo.com
Joined: Dec 26, 2007
Messages: 17
Offline
|
Jeff,
Can you provide the DSFI info for all the new Apollo steel shafts that our coming out?
Thanks!!
|
|
|
 |
|
|
Jeff Summitt
Joined: Jan 13, 2006
Messages: 2541
Offline
|
Here you go...Jeff
Shaft , Flex, Cut Weight, Frequency, Butt Defl., Tip Defl.,T/B Ratio,Cut Torque, DSFI, DSFI Range
Acculite 75 R 76.6 265 53 31 1.7 2.57 38 64 63-72
Acculite 75 S 76.7 275 54 35 1.5 2.42 38 67 66-76
Acculite 95 R 92.9 286 59 39 1.5 2.21 38 71 70-80
Acculite 95 S 94.5 295 63 42 1.5 2.02 38 75 73-84
Phantom R 90.9 286 62 41 1.5 2.23 38 71 70-82
Phantom S 92.3 295 66 44 1.5 2.07 38 74 73-84
|
|
|
|
|
|
hey_kuya@yahoo.com
Joined: Dec 26, 2007
Messages: 17
Offline
|
Thank you Jeff!
Could you tell me what the ball flight will be of Acculite 95? I was planning on using Phantom shafts in my new Dynacraft Prophet Tour Blade. But that got pushed to the side when I found out that the upcoming Acculite Gunsmoke shaft was based off the Acculite 95. I'd also like to hear your personal thoughts on these shafts (Phantom, Acculite95/Gunsmoke).
Thanks,
Charles
|
|
|
|
|
|
Jeff Summitt
Joined: Jan 13, 2006
Messages: 2541
Offline
|
Charles:
Aside for the stepped vs. non-stepped look, there is one slight differences. I found I was able to turn the ball over with a bit more ease with the Acculite 95 because of the little softer tip section. But I liked the weight, performance and feel of each of these very much. Hey, I am not getting any younger and the lighter weight is a blessing on these old bones.
Jeff Summitt
|
|
|
|
|
|
yygolfnb@yahoo.com.hk
Joined: Oct 29, 2006
Messages: 17
Offline
|
When will the 75 and 95 gram shafts out? Couldn't locate them in your on-line catalogue. Thanks.
|
|
|
|
|
|
Jeff Summitt
Joined: Jan 13, 2006
Messages: 2541
Offline
|
Sometime in December. I think the 75 will be one week later than the 95. If I find out any sooner, I will try to update this thread.
Jeff Summitt
|
|
|
|
|
|
hey_kuya@yahoo.com
Joined: Dec 26, 2007
Messages: 17
Offline
|
Jeff,
Since these shafts are so light, do I have to follow the same principles as graphite shafts and make my clubs 1/2" longer to achieve normal swing weights? I'm now leaning more toward Phantom, I like the stepless design and can handle a stiffer tip.
Charles
|
|
|
|
|
|
Jeff Summitt
Joined: Jan 13, 2006
Messages: 2541
Offline
|
Charles:
Maybe on the 75, but the others you should be fine with standard steel lengths. At worse you can add tip weights.
Jeff Summitt
|
|
|
|
|
|
don@mcluckie.net
Joined: Dec 15, 2006
Messages: 28
Offline
|
Will you be publishing a 2010 DSFI? I see the matrix provided in the catalog but I am hoping to be able to see the data. Thanks!
-Don M
|
|
|
|
|
|
Jeff Summitt
Joined: Jan 13, 2006
Messages: 2541
Offline
|
Don:
I hope to have it done by month's end.
Jeff Summitt
|
|
|
|
|
|
Register
Login
