Hireko Forum   Search   Recent Topics  Back to home page  Register /  Login

Reshafting Armour evo 300cc driver   Forum Index -> Ask Hireko Author Message 04/20/2009 04:50:11     Subject: Reshafting Armour evo 300cc driver scottdils@adelphia.net Joined: Apr 8, 2009 Messages: 2 Offline I was wondering if you could tell what the shaft specs are for this driver 04/20/2009 05:03:10     Subject: Re:Reshafting Armour evo 300cc driver Jeff Summitt Joined: Jan 13, 2006 Messages: 2541 Offline The only information I could find was it had "a low-torque, lightweight graphite shaft", which is not enough information to tell you anything. If you have it in front of you, what does the silkscreen on the shaft say? Jeff Summitt 04/20/2009 10:29:45     Subject: Re:Reshafting Armour evo 300cc driver scottdils@adelphia.net Joined: Apr 8, 2009 Messages: 2 Offline Im sorry I didnt include that,it says tommy armour evo series ,100% graphite filiment wound.its regular flex and .335 tip diameter.Id like a replacement with a higher kick point(lower ball flight) and light weight,Thank you 04/20/2009 10:38:21     Subject: Re:Reshafting Armour evo 300cc driver Jeff Summitt Joined: Jan 13, 2006 Messages: 2541 Offline Although this shaft (UST ProForce 75) is not filament wound, it would most likely be in the same weight range and produce a low trajectory. http://www.hirekogolf.com/hireko/orderportal/catalog_presentation/by_group/0/262/0/0/0/0/0 Jeff Summitt   Forum Index -> Ask Hireko Go to:  Select a forum   Technical Discussion - Equipment ------------- Ask Hireko Clubmaker to Clubmaker OEM Discussion   Let's Hear From You ------------- Testimonials Suggestions & Feedback   e-Commerce Announcements ------------- Press Releases Specials & Promos

Powered by JForum 2.1.4 © 2005 - Rafael Steil