| Author |
Message |
|
|
rfsm@capecod.net
Joined: Feb 12, 2006
Messages: 61
Offline
|
Jeff
I have a #6 iron to repair and before I jump into it can you tell me if there is anything unique about it.
Mizuna MX- 23 grain flow forged, TT Dynamic Gold. The markings under the grip are 6314086-2 LGISL300 39.50 I thind there might be more # where the shaft was cut to length. This sounds like a taper tip if so do you stock any?
Bob
|
|
|
 |
|
|
Jeff Summitt
Joined: Jan 13, 2006
Messages: 2541
Offline
|
Bob:
They are the taper tip version, which we do not stock. It is a S300 flex that is 39.5" long. Check the tip to first step length. If it is 10.5", then it is not recommended length for the 6-iron, rather the 4-iron. It could have been done that way if it were a longer-than-normal club length or something that was soft stepped to create an in-between flex.
Jeff Summitt
|
|
|
|
|
|
rfsm@capecod.net
Joined: Feb 12, 2006
Messages: 61
Offline
|
Jeff,
The finished Length of the #6 iron without the grip is 38.00". I have not pulled the head yet but the measurement from the top of the hosel to the first step is is 11.00"
Bob
|
|
|
|
|
|
rfsm@capecod.net
Joined: Feb 12, 2006
Messages: 61
Offline
|
Jeff, Major error on my part the shaft in question is a Dynalite gold NOT Dynamic Gold.
Bob
|
|
|
|
|
|
Jeff Summitt
Joined: Jan 13, 2006
Messages: 2541
Offline
|
Bob:
I should have read the code better, but a 39.5" taper tip Dynalite Gold S300 shaft should have a tip to first step dimension of 12" and would have been the suggested raw length to use for a 6 iron.
Jeff Summitt
|
|
|
|
|
|
Register
Login
