Hireko Forum   Search   Recent Topics  Back to home page  Register /  Login

Club position to ensure proper alignment during curing   Forum Index -> Ask Hireko Author Message 05/12/2009 09:05:07     Subject: Club position to ensure proper alignment during curing maclmc22@gmail.com Joined: Sep 29, 2008 Messages: 9 Offline Is there a trick to make the sure the clubhead/shaft stays in the proper position while the epoxy cures? Other than buying a curing rack, of course... Thanks in advance 05/12/2009 09:11:45     Subject: Re:Club position to ensure proper alignment during curing Jeff Summitt Joined: Jan 13, 2006 Messages: 2541 Offline You can take a strip of wood 2" wide and drill 1" holes in it spacing them out like every 1 1/2". Then cut the wood in half so the board looks like the following: _______________ n n n n n n n n n n Then you can screw it against your workbench so that it will individually hold the shafts so they stay in one place. Also, make sure to keep kids and animal away from your work. Jeff Summitt   Forum Index -> Ask Hireko Go to:  Select a forum   Technical Discussion - Equipment ------------- Ask Hireko Clubmaker to Clubmaker OEM Discussion   Let's Hear From You ------------- Testimonials Suggestions & Feedback   e-Commerce Announcements ------------- Press Releases Specials & Promos

Powered by JForum 2.1.4 © 2005 - Rafael Steil