| Author |
Message |
 05/14/2009 04:55:11
|
Subject: Shafts
|
|
|
davahai@hotmail.com
Joined: Jan 16, 2009
Messages: 3
Offline
|
Hello. i am have a problem with the shafts of my clubs bending right next to the ferrule do to the fact that my swing is very aggressive .I am currently using the xk pro irons with apollo stepless shafts. I had 905s last year with stepped shafts and had to reshaft the whole set i was wondering if there was another shaft you could recommend? I think my swing speed if around 110 to 120 mph with my driver not sure though know my ball speed is around 185 to low 190s. P.s. love these irons
|
|
|
 |
|
|
Jeff Summitt
Joined: Jan 13, 2006
Messages: 2541
Offline
|
If you are bending those shafts, there are few others to consider as the Apollo Stepless is already a heavier shaft. You can look at Dynamic Gold. We don't stock the X flex, but it would easy to take an S-flex and trim an additional 1.5 - 2" off of the tip. You may want to do the math ahead of time to make sure there is enough length especially if you require over length clubs.
Jeff Summitt
|
|
|
|
|
|
davahai@hotmail.com
Joined: Jan 16, 2009
Messages: 3
Offline
|
my fitting specs are a half inch longer than standard and 2 degrees upright thank you for the response
|
|
|
|
|
|
Jeff Summitt
Joined: Jan 13, 2006
Messages: 2541
Offline
|
You may want to simply tip trim the Dynamic Gold S300 shafts to length in order to obtain an X-flex and not have to use an extender for the 1/2" longer length.
Jeff Summitt
|
|
|
|
|
|
Register
Login
