| Author |
Message |
|
|
tlbowen3@flash.net
Joined: Aug 31, 2007
Messages: 31
Offline
|
Jeff,
I have a set of 8 iron shafts that are True Temper Dynamic Gold Shafts but I was curious if they were the DG Super Lite Shafts. All have the markings of DGISL*300 in lengths from 39" to 37" (qty.4 of 37" shafts) in 1/2 inch increments. I believe these are TT DG S300 "stiff" shafts in a 5 iron to a SW and they are .355" taper tips.
Am I correct? If so what designation do the DG SL's have?
Thanks,
Tim
|
|
|
 |
|
|
Jeff Summitt
Joined: Jan 13, 2006
Messages: 2541
Offline
|
Tim:
If the step pattern is 1 3/4" (constant), then they are the standard Dynamic Gold. The L at the end of the code was for "long" as True Temper started making them a longer raw length. That was a way to identify them. Also look at the silkscreen.
Jeff
|
|
|
|
|
|
tlbowen3@flash.net
Joined: Aug 31, 2007
Messages: 31
Offline
|
Jeff,
The silkscreen does just say True Temper Dynamic Gold "Made in U.S.A.".
Thanks for the quick reply!
Best regards,
Tim
|
|
|
|
|
|
Register
Login
