Hireko Forum
  Search   Recent Topics  Back to home page 
Register /  Login 
Specs on Taylor Made R-80 Lite Graphite Shaft  
Forum Index -> OEM Discussion
Author Message
07/20/2007 06:25:39     Subject: Specs on Taylor Made R-80 Lite Graphite Shaft
anonymous



The shaft on my TM 200 Steel 3 Wood broke today and I cannot locate the OEM specs on the shaft. Any ideas?

I will probably reshaft with a YS-6+ in regular flex but still want to know the specs as I though the shaft was just a bit "whippy".
07/20/2007 06:38:14     Subject: Re:Specs on Taylor Made R-80 Lite Graphite Shaft
Jeff Summitt


Joined: Jan 13, 2006
Messages: 2541
Offline
The specs I could find was it weighed 63g, 4.0* torque and a .350" tip.

Sincerely,

Jeff Summitt
07/20/2007 14:19:44     Subject: Re:Specs on Taylor Made R-80 Lite Graphite Shaft
anonymous



Thanks Jeff. Thats very close to the YS6+ aside from the mid-kick which should not pose a problem. My driver swingspeed avg is 90 mph and I have a pretty even tempo but higher than desired ball-flight. Hopefully the YS will be an improvement. I was concerned that a 70 gram R flex shaft may be a bit too much. Any ideas.

Thanks again.
 
  Forum Index -> OEM Discussion
Go to:   
Powered by JForum 2.1.4 © 2005 - Rafael Steil