http://www.hirekogolf.com/jforum/posts/14.page JForum - http://www.jforum.net http://www.hirekogolf.com/jforum/posts/1370#4679.page http://www.hirekogolf.com/jforum/posts/1370#4679.page
Sincerely,

Jeff Summitt]]> http://www.hirekogolf.com/jforum/posts/1370#4683.page http://www.hirekogolf.com/jforum/posts/1370#4683.page
Thank you for the quick response. Can you tell me the specific part numbers?

John A.]]> http://www.hirekogolf.com/jforum/posts/1370#4686.page http://www.hirekogolf.com/jforum/posts/1370#4686.page
The shaft is ULWRS
http://www.hirekogolf.com/hireko/orderportal/catalog_presentation/by_group/0/291/0/0/0/0/0

and the ferrule is VFT.

You will still need to grind the angle cut of the shaft to match the contour of the sole and fill or plug the shaft tip.

Sincerely,

Jeff Summitt]]> http://www.hirekogolf.com/jforum/posts/1370#4690.page http://www.hirekogolf.com/jforum/posts/1370#4690.page
Thank you for the part numbers. I screwed up because I didn't tell you I wanted to replace the shaft with a graphite shaft. What would be the graphite shaft equivalent and catalogue part number?

Sorry to be a bother.

John A.]]> http://www.hirekogolf.com/jforum/posts/1370#4700.page http://www.hirekogolf.com/jforum/posts/1370#4700.page
I don't think you can find an equivalent graphite shaft to the steel shaft that was originally in it. Callaway used a mid-70g 4.0 torque graphite shaft in that particular model. Something like a SK Fiber Tour Trac 80 (SKTT80-WR) would be a good replacement. However, I would not tip trim the shaft to make up for the bore thru insertion.

Sincerely,

Jeff Summitt]]> http://www.hirekogolf.com/jforum/posts/1370#4701.page http://www.hirekogolf.com/jforum/posts/1370#4701.page
Thank you.

John A.]]> http://www.hirekogolf.com/jforum/posts/1370#4710.page http://www.hirekogolf.com/jforum/posts/1370#4710.page