http://www.hirekogolf.com/jforum/posts/14.page JForum - http://www.jforum.net
Thanks]]> http://www.hirekogolf.com/jforum/posts/1413#4809.page http://www.hirekogolf.com/jforum/posts/1413#4809.page
Callaway started out with parallel tip shaft and split the tips as you have found. It is easier just to run a 3/8" drill bit down through the hosel as if you were cleaning out the old epoxy then using parallel tip shaft. If you are using a Rifle #1-iron blank, then tip trim 1" less off the tip than what would be called for. If you are using dedicated shafts, soft-step two shafts (i.e. use 2-iron shaft in a 4-iron head, 3-iron shaft into the 5-iron...).

Sincerely,

Jeff Summitt]]> http://www.hirekogolf.com/jforum/posts/1413#4812.page http://www.hirekogolf.com/jforum/posts/1413#4812.page