http://www.hirekogolf.com/jforum/posts/6.page JForum - http://www.jforum.net http://www.hirekogolf.com/jforum/posts/161#392.page http://www.hirekogolf.com/jforum/posts/161#392.page
Those could very well be a .320" taper tip shafts, which are not available anymore. If they are, then you can use a .355" taper tip shaft by going into the hosel about 1 1/4". You will most likely need to step-taper the hosel with a T-size (1 1/4"), U-size (3/4" deep) and a 3/8" bit (3/8" down). Test fit the .355" taper tip shaft as needed.

Jeff Summitt]]> http://www.hirekogolf.com/jforum/posts/161#395.page http://www.hirekogolf.com/jforum/posts/161#395.page