http://www.hirekogolf.com/jforum/posts/14.page JForum - http://www.jforum.net Any Advice for a replacement shaft?

Thank you for any help you can provide.

Chuck.]]> http://www.hirekogolf.com/jforum/posts/2528#6373.page http://www.hirekogolf.com/jforum/posts/2528#6373.page
If the back flange says Forged +, then the stock shaft was Dynamic Gold. You can always check by measuring the distance between steps - it should be 1 3/4".

Jeff Summitt]]> http://www.hirekogolf.com/jforum/posts/2528#6374.page http://www.hirekogolf.com/jforum/posts/2528#6374.page The back Flange only shows '56' and 'Forged'. There is no '+' symbol.

I did measure the steps and the first 5 are spaced about 1.25, and then the rest are spaced 1.50".

Chuck.]]> http://www.hirekogolf.com/jforum/posts/2528#6375.page http://www.hirekogolf.com/jforum/posts/2528#6375.page
Jeff Summitt]]> http://www.hirekogolf.com/jforum/posts/2528#6376.page http://www.hirekogolf.com/jforum/posts/2528#6376.page I was leaning towards putting a Dynalite in there, but I can't find a taper tip on the Website. Does Hireko offer the Taper Tip version of the Dynalite?

Chuck.]]> http://www.hirekogolf.com/jforum/posts/2528#6377.page http://www.hirekogolf.com/jforum/posts/2528#6377.page http://www.hirekogolf.com/jforum/posts/2528#6378.page http://www.hirekogolf.com/jforum/posts/2528#6378.page