http://www.hirekogolf.com/jforum/posts/6.page JForum - http://www.jforum.net I ordered a pair a Shadow graphite hybrid shafts for a Dynacraft Prophet #3 hybrid and a Dynacraft Prophet #5 hybrid. The apollo website lists tip cutting instructions for irons... are those the correct tipping lengths for hybrids?

Also, what finished length should these hybrid shafts be cut at? Same as a 3iron and 5iron?

Can I cut these graphite shafts with my chop saw?

Thanks,
stevek]]> http://www.hirekogolf.com/jforum/posts/2781#7172.page http://www.hirekogolf.com/jforum/posts/2781#7172.page
These hybrid shafts will follow the iron tip trimming chart because the tip diameter is the same as an iron (0.370"). The Prophet hybrids were designed to the same weight as a standard iron of the same number. So treat them as if they were a 3 and 5 iron for both tip trimming and length. You can cut the shafts with the chop saw assuming it is not a metal cutting blade but the non-ferrous abrasive wheels.

Jeff Summitt]]> http://www.hirekogolf.com/jforum/posts/2781#7175.page http://www.hirekogolf.com/jforum/posts/2781#7175.page As usual, you are there with the goods!

Very cool... soon I will have a complete set of Prophet clubs.

stevek]]> http://www.hirekogolf.com/jforum/posts/2781#7180.page http://www.hirekogolf.com/jforum/posts/2781#7180.page