<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0">
	<channel>
		<title><![CDATA[Latest posts for the topic "Trimming graphite shafts"]]></title>
		<link>http://www.hirekogolf.com/jforum/posts/9.page</link>
		<description><![CDATA[Latest messages posted in the topic "Trimming graphite shafts"]]></description>
		<generator>JForum - http://www.jforum.net</generator>
			<item>
				<title>Trimming graphite shafts</title>
				<description><![CDATA[ Can you use a tube cutter to trim a graphite shaft?  I've seen wheel replacements for exactly that purpose, but I've heard others tell me to absolutely NEVER use a tube cutter on graphite - special wheel or no special wheel... So what's the real story??]]></description>
				<guid isPermaLink="true">http://www.hirekogolf.com/jforum/posts/3032#7989.page</guid>
				<link>http://www.hirekogolf.com/jforum/posts/3032#7989.page</link>
				<pubDate><![CDATA[Tue, 19 May 2009 04:53:01]]></pubDate>
				<author><![CDATA[ maclmc22@gmail.com]]></author>
			</item>
			<item>
				<title>Re:Trimming graphite shafts</title>
				<description><![CDATA[ Until the day I find a specialty tubing cutter wheel designed to safely cut graphite shafts, I will be in the camp that say NO to ever using a tubing cutter with graphite shafts.  Make sure to ask the people that sell or recommend one if they will warrant any shaft that cracks as a result.<br> <br> Jeff Summitt]]></description>
				<guid isPermaLink="true">http://www.hirekogolf.com/jforum/posts/3032#7993.page</guid>
				<link>http://www.hirekogolf.com/jforum/posts/3032#7993.page</link>
				<pubDate><![CDATA[Tue, 19 May 2009 05:02:36]]></pubDate>
				<author><![CDATA[ Jeff Summitt]]></author>
			</item>
			<item>
				<title>Re:Trimming graphite shafts</title>
				<description><![CDATA[ I've seen these too but have never used one. I think they would be too rough on the shaft as you turned it and might tear more than cut. I've used a grit impregnated blade for a hacksaw framewith no problem. But the best method has been a chopsaw with metal cutting wheel or a similar small diameter wheel in a handheld grinder. Remember to use masking tape wear the cut will be made.]]></description>
				<guid isPermaLink="true">http://www.hirekogolf.com/jforum/posts/3032#7992.page</guid>
				<link>http://www.hirekogolf.com/jforum/posts/3032#7992.page</link>
				<pubDate><![CDATA[Tue, 19 May 2009 09:50:43]]></pubDate>
				<author><![CDATA[ genterdj@gov.ns.ca]]></author>
			</item>
			<item>
				<title>Re:Trimming graphite shafts</title>
				<description><![CDATA[ Thanks genter for the suggestion. I guess the tape is for holding the piece and making the tear less. But can a metal hand saw can be used?<br> <br> <img src="http://storeyourpicture.com/images/signature_golf.jpg" border="0">]]></description>
				<guid isPermaLink="true">http://www.hirekogolf.com/jforum/posts/3032#8002.page</guid>
				<link>http://www.hirekogolf.com/jforum/posts/3032#8002.page</link>
				<pubDate><![CDATA[Wed, 20 May 2009 05:13:08]]></pubDate>
				<author><![CDATA[ jill0175@yahoo.com]]></author>
			</item>
			<item>
				<title>Re:Trimming graphite shafts</title>
				<description><![CDATA[ The tape is for reducing splintering of the shaft.  The metal saw (frame) can be used, but not a standard hacksaw blade they come equipped with.  You need a special non-serated blade to safely cut the graphite shafts with.<br> <br> Jeff Summitt]]></description>
				<guid isPermaLink="true">http://www.hirekogolf.com/jforum/posts/3032#8007.page</guid>
				<link>http://www.hirekogolf.com/jforum/posts/3032#8007.page</link>
				<pubDate><![CDATA[Wed, 20 May 2009 05:23:52]]></pubDate>
				<author><![CDATA[ Jeff Summitt]]></author>
			</item>
	</channel>
</rss>
