http://www.hirekogolf.com/jforum/posts/9.page JForum - http://www.jforum.net
I am replacing a broken Apollo shaft and could use some help identifying the best current model to match it. On the grip end, it has printed: Apollo acculite R iron M/S 39". Just below the grip, the shaft gets larger, to about .640" for about 2-3/4 inches. There are no shaft bands on the set, can you tell from the above what flex the shaft is?

Cheers, Lee]]> http://www.hirekogolf.com/jforum/posts/3121#8291.page http://www.hirekogolf.com/jforum/posts/3121#8291.page
The original Acculite shaft with the "Decastep" - I remember it well. It should be S-flex, but you can tell by the tip to first step dimension. For S-flex it was 10" and for R-flex it was 12". By the way, that shaft was only trimmed from the tip end.

Jeff Summitt]]> http://www.hirekogolf.com/jforum/posts/3121#8293.page http://www.hirekogolf.com/jforum/posts/3121#8293.page
Thanks for the help. What would you recommend as a replacement?

Cheers, Lee]]> http://www.hirekogolf.com/jforum/posts/3121#8294.page http://www.hirekogolf.com/jforum/posts/3121#8294.page
Jeff Summitt]]> http://www.hirekogolf.com/jforum/posts/3121#8296.page http://www.hirekogolf.com/jforum/posts/3121#8296.page