http://www.hirekogolf.com/jforum/posts/9.page JForum - http://www.jforum.net
Can you provide the DSFI info for all the new Apollo steel shafts that our coming out?

Thanks!!]]> http://www.hirekogolf.com/jforum/posts/3221#8638.page http://www.hirekogolf.com/jforum/posts/3221#8638.page
Shaft , Flex, Cut Weight, Frequency, Butt Defl., Tip Defl.,T/B Ratio,Cut Torque, DSFI, DSFI Range
Acculite 75 R 76.6 265 53 31 1.7 2.57 38 64 63-72
Acculite 75 S 76.7 275 54 35 1.5 2.42 38 67 66-76
Acculite 95 R 92.9 286 59 39 1.5 2.21 38 71 70-80
Acculite 95 S 94.5 295 63 42 1.5 2.02 38 75 73-84
Phantom R 90.9 286 62 41 1.5 2.23 38 71 70-82
Phantom S 92.3 295 66 44 1.5 2.07 38 74 73-84
]]> http://www.hirekogolf.com/jforum/posts/3221#8639.page http://www.hirekogolf.com/jforum/posts/3221#8639.page
Could you tell me what the ball flight will be of Acculite 95? I was planning on using Phantom shafts in my new Dynacraft Prophet Tour Blade. But that got pushed to the side when I found out that the upcoming Acculite Gunsmoke shaft was based off the Acculite 95. I'd also like to hear your personal thoughts on these shafts (Phantom, Acculite95/Gunsmoke).

Thanks,
Charles ]]> http://www.hirekogolf.com/jforum/posts/3221#8682.page http://www.hirekogolf.com/jforum/posts/3221#8682.page
Aside for the stepped vs. non-stepped look, there is one slight differences. I found I was able to turn the ball over with a bit more ease with the Acculite 95 because of the little softer tip section. But I liked the weight, performance and feel of each of these very much. Hey, I am not getting any younger and the lighter weight is a blessing on these old bones.

Jeff Summitt]]> http://www.hirekogolf.com/jforum/posts/3221#8683.page http://www.hirekogolf.com/jforum/posts/3221#8683.page http://www.hirekogolf.com/jforum/posts/3221#8685.page http://www.hirekogolf.com/jforum/posts/3221#8685.page
Jeff Summitt]]> http://www.hirekogolf.com/jforum/posts/3221#8686.page http://www.hirekogolf.com/jforum/posts/3221#8686.page
Since these shafts are so light, do I have to follow the same principles as graphite shafts and make my clubs 1/2" longer to achieve normal swing weights? I'm now leaning more toward Phantom, I like the stepless design and can handle a stiffer tip.

Charles ]]> http://www.hirekogolf.com/jforum/posts/3221#8694.page http://www.hirekogolf.com/jforum/posts/3221#8694.page
Maybe on the 75, but the others you should be fine with standard steel lengths. At worse you can add tip weights.

Jeff Summitt]]> http://www.hirekogolf.com/jforum/posts/3221#8695.page http://www.hirekogolf.com/jforum/posts/3221#8695.page
-Don M]]> http://www.hirekogolf.com/jforum/posts/3221#8893.page http://www.hirekogolf.com/jforum/posts/3221#8893.page
I hope to have it done by month's end.

Jeff Summitt]]> http://www.hirekogolf.com/jforum/posts/3221#8894.page http://www.hirekogolf.com/jforum/posts/3221#8894.page