Orlimar Practice Golf Balls

Customer Service (800) 367-8912     Tech Support (800) 942-5872

Orlimar Golf Mats


Product Name Price Qty
Dynacraft Spot Putter (RH) - Clubhead
$14.95
In stock
    
  • 0
$0.00


Click on the image above to enlarge

Customer Reviews

6 Item(s)

per page
assembly of putter head Review by vincent
Rating
Very responsive & solid feel during the stroke. Ball does not fly off the head when struck. It responds to the force you apply & does not add any extra force to the roll. Every one complains about the screws except me! All you need to do is add a slight amount of "blue locktite" using a tooth pick on the first two threads. Do not over think this process!! (Posted on 6/19/2016)
Allen Head Cap Screws Too Short Review by Jeffrey
Rating
As Serast stated, the Allen head cap screws are too short! Mine stripped after the third tightening while being very gentle. First I re-tapped the threads in the putter head. Then I bought some 12mm long screws, shortened them by 1-1/2 mm and used #10 lock washers underneath the cap screws, and was able to tighten the screws quite tight. This is something that should have been fixed 2 years ago. (Posted on 7/16/2015)
poor design of the screws Review by Chet
Rating
be careful not to over-tighten the screws, the strip the threads easily. (Posted on 1/18/2015)
Purchased for fitting tool but it stays in my bag! Review by Jim
Rating
I love this putter. I bought it to both try and demo the effects of different hosel angles and positions, but the thing is the best putter I have used in years. My wife stole my short length version as she liked it so well so I took my midlength version apart and installed another short shaft fpr my own use.. By the way, the midlength worked very well also. (Posted on 8/28/2013)
Excellent Feel and Roll Review by Bob
Rating
I purchased the SPOT putter assembled with a Slant Barrel Hosel, Apollo stepless shaft and Karma Blue/Silver putter grip finished to 35". The workmanship is very good. This putter is easy to align and produces an excellent feel and roll.

(Posted on 4/17/2013)
Needed improvement on the Allen Cap screw & materials Review by Serast
Rating
Recently, I purchased the Dynacraft SPOT Putter with Slant Hosel. The Allen cap Screw used for securing the Putter Head to the hosel is short & made of tensile steel, when just a little bit over tigthened, the thread on the Head become warped and loosened.It cannot be tigthened again. I suggest Dynacraft to provide a longer Allen Cap Screw(from 5mm length to 10 or 12mm lenght) to prevent lossening of thread.
thanks/regards
Serast TAY (Posted on 4/2/2013)

6 Item(s)

per page

Write Your Own Review

Only registered users can write reviews. Please, log in or register