Customer Service (800) 367-8912     Tech Support (800) 942-5872
$0.70reg $1.00 - saving of 30%
    Water Activated Double Sided Grip Tape Strip
    Model: IWT-001
Qty   Price
In stock
  • 0

Click on the image above to enlarge


These are individual strips of water-based grip tape that are 10 inches long and 2 inches wide. Sold individually.

Helpful tips:

Peel the back liner off of the individual strip of tape.  Apply the sticky side down length-wise onto the shaft.  Make sure that about 1/2” of the tape extends beyond the butt end of the shaft.  Peel off the top liner of the tape and carefully wrap the tape around the shaft, making sure it does not wrinkle.  Twist the 1/2” of the tape extending beyond the shaft and push it into the butt end of the shaft.

To lubricate the tape, you have two options.  The first is to mix two tablespoons of dishwashing liquid in one quart of tap water.  For faster drying, you can also us clear glass cleaner with ammonia straight from the bottle. Allow 24 hours for the grip to completely dry if you use the water solution.  When using glass cleaner, the grip will dry in approximately 8 hours.

Customer Reviews

Items 1 to 25 of 25 total

per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register

    Questions on Water Activated Double Sided Grip Tape Strip

    Sort by Descending
    • From JOHN JOYCE at 6/7/2013 1:40 PM
      • Please tell me how many strips of tape do you get for $.40????
      • John,

        The price is per strip.
      • Do you find this question helpful?  Yes   No
    • From Gmel3 at 7/4/2013 10:55 AM
      • Do you wet both the inside of the grip and the strip? Same procedure as with the solvent activated tape? What is the drying time?
      • Yes, apply liquid to both the tape and inside of the grip as you would with solvent based tape. Drying time will vary depending upon the type of liquid and the grip. If using soap and water mixture, I would wait a full 24 hours. However, if you use ammonia based Windex or glass cleaner straight from the bottle, drying time could be in as little as 4 hours.
      • Do you find this question helpful?  Yes   No
    • From Rusty at 11/21/2014 11:10 PM
      • How many pieces of tape do I need per club? Just one?
      • Rusty,

        Just one as they are placed lengthwise on the shaft and wrapped around to cover the butt end.
      • Do you find this question helpful?  Yes   No
    • From Tony at 8/31/2016 4:46 PM
      • Is it possible to remove a grip with something like Dynacraft Blade Style Grip Remover ? What type of liquid would you use grip solvent or water ?
      • Tony,

        The tape will usually stick to the shaft as you are just removing the grip with the Dynacraft Blade Style Grip Remover. You are better off using a solvent in this application.
      • Do you find this question helpful?  Yes   No

    Ask Your Own Question

    Back to the product page
    Model # Weight UPC
    IWT-001 0 852674681425
    Shipping Length (inches) Shipping Width (inches) Shipping Height (inches) Shipping Weight (pounds)
    13 11 2 0.5
      Related products for you