Acer SR1 Titanium Driver - Clubhead - All Questions

angled sole and face view of the Acer SR1 titanium driver
Acer SR1 Titanium Driver - Clubhead
SKU
TMC1280A
Set Descending Direction
How does this compare to the XV series?
Question by: Bob W on Aug 16, 2022, 6:11 PM
Bob,

The shape is the same, but this is an improved clubhead series. By adding the cup face structure, it provide more performance over a wider area of the face.
Answer by: Jeff Summitt on Aug 17, 2022, 6:03 AM
Is this a usga conforming driver?
Question by: Jim Hoover on Aug 23, 2022, 6:38 AM
We did not submit it to the USGA for a formal ruling, but we designed this to be conforming for CT/COR, volume, MOI, etc.
Answer by: Jeff Summitt on Aug 23, 2022, 7:00 AM
Is the bottom of the hosel into the head open or closed?
Question by: Rob Halford on Aug 23, 2022, 7:17 AM
Rob,

There is a stop at the bottom of the hosel to prevent epoxy from flowing inside the head and potentially causing a rattle.
Answer by: Jeff Summitt on Aug 23, 2022, 7:57 AM
No shaft specs or choices ?
Question by: Eidolon on Aug 24, 2022, 7:43 AM
This product page is for the clubhead only. If you want to order a custom assembled Acer SR1 driver, then please use this link: https://www.hirekogolf.com/acer-sr1-titanium-driver-custom-assembled.html
Answer by: Jeff Summitt on Aug 24, 2022, 8:54 AM
Will there be a Fairway Wood option coming soon with the new cup face?
Question by: Jan Van on Aug 29, 2022, 5:51 PM
Yes, there will be matching new fairways and hybrids with the cup face.
Answer by: Jeff Summitt on Aug 30, 2022, 7:00 AM
I plan to pair this head with the apollo shadow UL shaft. The recommended tip trim calls for 2". Can I leave it untrimmed or maybe trim only 1"? How would the affect the performance? I am 84 and don't swing the club very fast, I would sly I have a slow tempo. I would say I'm about a 22 to 25 handicap player on a regular course. I play mostly on our executive course which has a 62 par for 18 holes and I have a 16 handicap there.
Question by: George DeVinna on Oct 1, 2022, 11:54 AM
George,

The less you tip trim, the more flexible the shaft will become. Ladies flex would call for 1" tip trimming. If you elected to butt trim only, then the shaft will be even more flexible than standard Ladies flex.
Answer by: Jeff Summitt on Oct 3, 2022, 6:00 AM
Do you know the MOI number of the SR1 driver?

Thanks
Question by: Chad on Aug 14, 2023, 9:03 PM
It is roughly in the 4800 g-cm^3 range.
Answer by: Jeff Summitt on Aug 16, 2023, 5:47 AM
Do I need a ferrule with the SR1 driver and 3 wood?
Question by: Mike Scholes on Aug 19, 2023, 4:37 AM
Yes, these clubs were designed to have a ferrule to provide a smooth transition from the top of the hosel to the shaft.
Answer by: Jeff Summitt on Aug 19, 2023, 4:47 AM
The hosel depth of this driver for installing the shaft appears to be almost two inches. Will this affect the flex of the shaft to make it stiffer or the launch characteristic to make it lower? Thanks
Question by: Rob on Sep 28, 2023, 1:15 PM
The insertion depth of the hosel down to where the stop (or ridge) is 38mm or 1.5" on this model. This would be considered normal on a modern driver. However, as a general answer to your question is it would make the shaft stiffer with a deeper insertion depth and a reduced bottom of bore to ground line measurement and subsequently launch the ball lower as a result.
Answer by: Jeff Summitt on Sep 28, 2023, 1:45 PM
Does this driver head produce a annoying sound when struck?
Question by: Roger Koons on Oct 20, 2023, 9:46 AM
No, this has a nice muted sound - very neutral.
Answer by: Jeff Summitt on Oct 20, 2023, 10:58 AM

Items 1 to 10 of 12 total

Page
Show per page