Customer Service (800) 367-8912     Tech Support (800) 942-5872
$7.00reg $7.00
    Apollo Acculite 95 Steel Iron Golf Shafts
    Model: APMACL95

Product Name Price Qty
Apollo Acculite 95 Steel - Iron R/S

Notify me when available

Out of stock
  • 0

Click on the image above to enlarge

Product Video


The Acculite 95 is yet another high performance lightweight steel shaft from Apollo, but don’t let the more traditional step pattern fool you. This shaft delivers an astonishing blend of balance, control and feel. In what might be the most popular weight in the series this shaft possesses enough difference in weight between standard weight shafts to noticeably swing with less effort, yet not so light that it could sacrifice any control.

Customer Reviews

Items 1 to 25 of 25 total

per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register

    Questions on Apollo Acculite 95 Steel Iron Golf Shafts

    Sort by Descending
    • From Greg at 8/24/2016 9:13 AM
      • using shaft with prophet irons and acer xs hybrids. Hybrids will be replacing 3 and 4 iron. Would I use the shaft trim code for the 3 and 4 irons?

      • Greg,

        In this case, correct as the XS hybrids weigh the same as the corresponding iron number.
      • Do you find this question helpful?  Yes   No
    • From Mark at 12/4/2016 6:42 AM
      • If i were to use this shaft on a power play 5000 5h, are trimming instructions for the butt end, tip, or combination?
      • Mark,

        You will be trimming off each end. For R-flex you would tip trim 1.5" and for S-flex you would tip 3.5". Then you would cut the butt end to your desired length.
      • Do you find this question helpful?  Yes   No
    • From Bob Woodrick at 12/12/2016 11:41 AM
      • How do these shafts compare to the True Temper 105s300 shafts?
      • Bob,

        The Acculite 95 will be @ 6 grams lighter for starters, plus not as stiff in the tip section.. The Acculite 95 is only available in parallel tip while the XP 105 is taper tip.
      • Do you find this question helpful?  Yes   No
    • From Stephen at 4/22/2017 10:09 AM
      • What would the trimming recommendation be to reshaft my 1996 Big Bertha (bore thru) be to maintain a regular flex? Would it be the same for the Phantom?
      • Stephen,

        For R-flex in a normal head the recommended tip trimming is found on the following chart:¬e=undefined

        If you are installing these into a thru bore design, take 1" less off the tip to adjust for the deeper bore. The Phantom is the same.
      • Do you find this question helpful?  Yes   No
    • From Jim at 6/19/2017 7:40 AM
      • I used Apollo standard steel shafts to build a set of Pinhawk SL 4-pw and I find the flights on the 4-5 irons too low. Would this be a good shaft to get a higher ball flight for those clubs?
      • Jim,

        Probably the better shaft to launch the ball higher would be the Shadow, although the Acculite 95 would help some.
      • Do you find this question helpful?  Yes   No

    Ask Your Own Question

    Back to the product page
    Model # Weight Flex Torque Butt Diameter Tip Diameter Raw Length Ball Flight Parallel Tip Trim Code UPC
    APMACL95-001-IRS 105 R/S   0.600 in 0.370" Parallel 42 in Mid-High 9.88 in R: IH18 / S: IH21 852674727543
    Shipping Length (inches) Shipping Width (inches) Shipping Height (inches) Shipping Weight (pounds)
    48 4 4 2