Customer Service (800) 367-8912     Tech Support (800) 942-5872
$13.95reg $13.95
    Epoxy A+B 4oz Bottles
    Model: EP01-001
Qty   Price
In stock
  • 0

Click on the image above to enlarge


24 hour shafting epoxy. Two 4 ounce part A/B epoxy. Mix 1:1 ratio. Sets in 3 hrs, cures in 24 hours. Dries Black.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Questions on Epoxy A+B 4oz Bottles

Sort by Descending
  • From Jamison at 1/27/2014 12:02 AM
    • What color is the epoxy when it dries?
    • The epoxy will dry black, which is good to hide any imperfections or gaps below the ferrule or when doing any thru bore installations.
    • Do you find this question helpful?  Yes   No
  • From Andrew at 5/26/2015 7:38 PM
    • What is the breakdown temperature of this epoxy? The temperature that the epoxy releases its bond so a shaft and club head can be separated.
    • Andrew,

      It is roughly 300º F.
    • Do you find this question helpful?  Yes   No
  • From Markus at 10/5/2015 12:07 PM
    • I used this epoxy for the first time 36 hours ago. What consistency should I expect from the remainder on my mixing board? It still feels slightly sticky but not moist. It feels solid but not as hard as I expected. In other words, should the mixture dry to a plastic like coating?
    • Markus,

      It may still feel tacky, especially around the edges. But full cure is 24 hours at normal room temperatures. If you mixed the epoxy on masking tape or if your mixing board is pliable, you should be able to flex the epoxy without breaking. This is what gives it some elasticity.
    • Do you find this question helpful?  Yes   No

Ask Your Own Question

Back to the product page
Model # Weight UPC
EP01-001 0 852674684136
Shipping Length (inches) Shipping Width (inches) Shipping Height (inches) Shipping Weight (pounds)
8 2 2 1.2
    Related products for you