Customer Service (800) 367-8912     Tech Support (800) 942-5872

Turn your Dynacraft Bench Ruler Soleplate into an Accurate Swingweight Scale

THE MOST VERSATILE CLUBMAING TOOL AND MEASUREMENT GAUGE FOR YOU WILL EVER USE

If you have a good quality gram weight scale, you can adapt your Dynacraft Bench Ruler Soleplate (DBRPLATE) into an accurate swingweight scale. Follow these five easy steps and enter your figures into the world's most accurate on-line swingweight calculator.

STEP 1 Weight your club on your gram weight scale.

Hireko Swingweight Scale Calculator Step 1

STEP 2 Turn the DBRPLATE on its side with the bottom roll pins parallel to your workbench so the notch is pointing toward the ceiling.  Next, slide your 48” ruler against the plate. Position both near the edge of the workbench as shown.

Hireko Swingweight Scale Calculator Step 2

STEP 3 Place the club on top of the notch with the head overhanging the workbench.  The goal is to balance the club so it is level with the workbench as shown. The more level the better the results.

Hireko Swingweight Scale Calculator Step 3

STEP 4 Place an object (like the Dynacraft Ferrule Block) so it butts up against the end of the grip or the bare shaft (if un-gripped).

Hireko Swingweight Scale Calculator Steps 4 and 5

STEP 5 Note the edge of the object (closest to the DBRPLATE) on the 48” ruler and mark it down. For more accurate results use a ruler with 1/16” increments.

STEP 6 Input the results from Steps 4 and 5 into the Swingweight Calculator. For example, enter 405.3 grams and 29.06” (for 29 1/16”) and it will yield a swingweight of D1.0.

BUY THE DYNACRAFT BENCH RULER SOLEPLATE Buy the Dynacraft Bench Ruler SoleplateDynacraft Bench Ruler Soleplate
Code:  DBRPLATE    $26.95  

BUY THE DYNACRAFT BENCH RULER SOLEPLATE KIT Buy the Dynacraft Bench Ruler Soleplate Kit
Code:  DBRPLATE-KIT (Includes 48" Ruler)    $33.95