Customer Service (800) 367-8912     Tech Support (800) 942-5872

Choose your clubs

Grip Size: Standard
Grip: Karma Velour Black Golf Grips

Change Grip
Shaft Flex: Regular
Shaft: Apollo Standard Steel - Iron R/S

Change Shaft
Black Ferrule

Change Ferrule
Club Length
Mens Standard

Change Club Length
  • 0
  • 0
  • 0
reg $49.00
    Pinhawk Vertex Dual Length Iron - Custom Assembled
    Model: XVI3746A

Click on the image above to enlarge



The Ultimate in Modern Day Technology for Game Improvement
The golf industry has learned a lot in the last few years with regard to irons. Single length irons, whether it be our own extremely popular Pinhawk SL irons, Cobra’s, or other brands, have been proven to make the game easier. Bryson Dechambeau, love him or hate him, has shown the world that the single length concept is viable even at the highest level.

But is a full set of single length irons, from #3 iron all the way through sand wedge, ideal for every golfer? Simply put, no. A player with a slower swing speed may have trouble elevating their “long” irons in a single length set. If they do not have the swing speed in order to achieve an adequate launch, it can sap the distance of their “long” irons. Of course, for many, dealing with a lower launch on their “long” irons in single length clubs is worth the trade-off of having game improvement consistency.


The Best of Both Worlds
Introducing the Pinhawk Vertex Dual Length Irons! A vertex in math is defined as “a point where two lines meet”, and that is the perfect name to describe these irons. Not completely single length, and not traditional length. Instead, just two different lengths: the 3, 4 and 5 irons one length, and the 6, 7, 8, 9, PW, AW, SW another.


This configuration results in no distance loss in the long irons and the full benefits of single length irons in the “short” set (6-SW). 2 different lengths, and just 2 swing planes, vs many planes in a traditional set.


The New Iron Technology
The 3 and 6 iron use a new iron technology. First, they have an ultra-thin, high strength cup face to help increase ball speed and maximize distance. The weight saved by the thinner face is positioned to allow for an optimal launch angle. This is a hollow bodied design that provides unparalleled forgiveness and distance.


The technology used in the lower lofted club in each of the two Vertex lengths (the 3 iron being the lowest lofted club of the long irons, and the 6 iron being the lowest lofted club of the short irons) is necessary for correct distance gapping across the entire set.

Club Loft Lie Offset Bounce Standard Length*
#3 Iron 18.5° 62° 7.6 mm 38"
#4 Iron 22° 62° 7.2 mm 38"
#5 Iron 26° 62° 6.8 mm 38"
#6 Iron 28.5° 63.5° 5.5 mm 36.5"
#7 Iron 31.5° 63.5° 4.8 mm 36.5"
#8 Iron 35.5° 63.5° 4.0 mm 36.5"
#9 Iron 40° 63.5° 3.5 mm 36.5"
PW 45° 63.5° 2.9 mm 36.5"
AW 50° 63.5° 1.0 mm 36.5"
SW 55° 63.5° 1.0 mm 12° 36.5"

*Men's standard length with steel shaft. Ladies length is 1" less. Graphite shafts are an additional 1/2" longer.

Proudly custom assembled in the USA


The 411 on The Pinhawk Vertex Dual Length Irons

Can I just order the “short set”?
Absolutely. As we mentioned above, the Pinhawk Vertex “short” set (6, 7, 8, 9, PW, AW, SW) is a no-brainer for almost any golfer that wants more consistency in their game. We honestly feel that you would love the entire set, but we realize that some players don’t use irons much beyond their 6 iron.

Can’t I just buy some other iron heads and make (or modify) a set like this?
No, if you want a playable set. Both single length or dual length iron set cannot be made from traditional iron heads. A traditional set of iron heads has a different weight and lie angle for every head. If you were to try and build a set of single length or dual length set with heads of varying weight, not only would your swing weights vary wildly, but the flex of each club would also be different throughout the entire set.

Are they available in left hand?
Currently, there are no immediate plans of offering these in a left-handed version.

Can they be bent for lie?
Yes, the Vertex irons can be bent upright or flat a maximum of two degrees from the published specs.

Are the Pinhawk Vertex Irons USGA Legal?
Yes. They are listed as conforming irons on the USGA Informational Club Database, listed under Pinhawk.


Write Your Own Review

Only registered users can write reviews. Please, log in or register

Questions on Pinhawk Vertex Dual Length Iron - Custom Assembled

No questions asked yet

Ask Your Own Question

Back to the product page
Shipping: Normally ships in 3-5 business days Warranty: Standard 1-Year Warranty
Model # Hand Club Loft Lie Weight Offset Bounce Std Clublength Hosel ID UPC
XVIH3746A-003 RH #3     0          
XVI3746A-004 RH #4     0          
XVI3746A-005 RH #5     0          
XVIH3746A-006 RH #6     0          
XVI3746A-007 RH #7     0          
XVI3746A-008 RH #8     0          
XVI3746A-009 RH #9     0          
XVI3746A-10P RH PW     0          
XVI3746A-15A RH AW     0          
XVI3746A-20S RH SW     0          
Shipping Length (inches) Shipping Width (inches) Shipping Height (inches) Shipping Weight (pounds)
48 4 4 2