Customer Service (800) 367-8912     Tech Support (800) 942-5872

Choose your clubs

  • #3
  • In stock
  • $4.95
  • #4
  • In stock
  • $4.95
  • #6
  • In stock
  • $4.95
  • #8
  • In stock
  • $4.95
  • PW
  • Low Qty.
  • $4.95
  • SW
  • In stock
  • $4.95
  • Customize options for your clubs

  • Lie Adjustment:
    Note: The bending may create slight marks on the head and will not be considered a defect.
    • 0
    • 0
    • 0
    $4.95reg $8.95 - saving of 45%
      Acer XF HT Iron - Clubhead (Left Hand)
      Model: I3308

    Click on the image above to enlarge


    The Acer XF is our latest generation of game-improvement irons to replace our ever-popular Acer XK line that was named Golf Digest's 2009 Best Value iron. More chiseled than its predecessor to garner more a dramatic appearance, we were able to push the center of gravity even deeper (1.4mm) and lower (0.2mm) for improved performance. Another way to put it is the XF stands for extra forgiveness. The non-glare topline has been beveled to provide a less chunky appear at address. The higher launching XF High Trajectory is designed for higher handicappers with a lower center of gravity design.

    Constructed of 431 stainless steel; bendable. 5-iron blade length 82mm, 5-iron sole width 24mm

    Customer Reviews

    Items 1 to 25 of 25 total

    per page

      Write Your Own Review

      Only registered users can write reviews. Please, log in or register

      Questions on Acer XF HT Iron - Clubhead (Left Hand)

      Sort by Descending
      • From Randy at 10/10/2013 11:13 AM
        • What is the sole width of this iron (Acer HF XT iron). Is this iron suitable with mid trajectory regular flex graphite shafts or will I lose distance with this iron head and the XDS will be more suitable. I am a senior with some arthritis in hands and shoulders. My 7 iron distance with lightweight steel shafts I am using now is 150 yards. I am considering changing to mid trajectory filament wound graphite shafted clubs with no more than 3.5 degrees of torque. I normally hit my irons with a mid trajectory, but would like a slightly higher trajectory.
        • Randy,

          The sole width of the Acer XF HT #5 iron is 24mm. If you are looking at a higher trajectory, then you will get that with the Acer XF HT over the Acer XDS React with the same shaft, flex and length.
        • Do you find this question helpful?  Yes   No
      • From RONALD STROM at 3/20/2014 4:18 AM
        • How do you determine lie adjustment required? Is it a true angle adj. or is it an offset adjustment?
          If one makes a 1 degree adjustment what is the effect at the grip end of the shaft?
          And or the loft?
        • Ronald,

          You really need to have hit the exact head, shaft, flex and length combination ahead of time and watch ball flight or hit off of a lie board to determine if you need the lie adjusted at all. If the ball flight is straight, I wouldn't touch the lie. But if you are pulling the ball consistently, then a flatter lie is in order and conversely, a consist push would probably indicate a more upright lie angle.

          You actually control the butt end when you address the club. Lie may influence how high or low you do, but that is not always the case.

          If lie is bend properly, then there is no change to the loft or offset.
        • Do you find this question helpful?  Yes   No

      Ask Your Own Question

      Back to the product page
      Model # Hand Club Loft Lie Weight Offset Bounce Std Clublength Hosel ID UPC
      IL3308-003 LH #3 22° 59.5 d 242 8 mm 0 d 39 in 0.370"  
      IL3308-004 LH #4 24.5° 60.6 d 249 7.5 mm 0 d 38.5 in 0.370"  
      IL3308-006 LH #6 30° 62 d 263 6.8 mm 1 d 37.5 in 0.370"  
      IL3308-008 LH #8 38° 63.5 d 277 6 mm 3 d 36.5 in 0.370"  
      IL3308-10P LH PW 46.5° 65 d 291 5 mm 5 d 35.5 in 0.370"  
      IL3308-20S LH SW 56° 65 d 298 4.5 mm 12 d 35.25 in 0.370"  
      Shipping Length (inches) Shipping Width (inches) Shipping Height (inches) Shipping Weight (pounds)
      0 0 0 0
        Related products for you