Slant Hosel Putter Adapter

Grouped product items
Product Name
No options of this product are available.

This precision cast, stainless steel adapter is designed to fit virtually any putter with a 0.370" parallel bore 90° socket and transform it into an entirely different putter regardless of manufacturer. The Slant Neck adapter converts a right-handed putter designed to have a compound double bend shaft with the proper lie/offset and accept a straight shaft. Weighs 44g. Creates a 72° lie angle. This has an attractive neutral bead blast finish.

Directions: Simply test fit stem into the putter's socket as it should be a tight fit. If it does not fit, lightly hand sand stem until it is snug. Apply quick setting epoxy to stem, seat and align adapter and allow the epoxy to harden. Lastly, install the new shaft - it's that simple!

Slant Neck Putter Adapter instructions

Specifications
Model # Weight UPC

Product Questions

What is the diameter of the bottom of post.
Question by: Derek on Jan 13, 2014, 5:24 AM
Derek;

The bottom post (portion that fits inside the head) is 0.370" diameter.
Answer by: Richard Lin on Jan 14, 2014, 5:01 AM
how much offset does the have? can the offset be adjusted?
Question by: john on Aug 1, 2013, 10:53 AM
John,

The offset will have to do with where the socket is located relative to the leading edge of the face. But to put that into perspective, the slant has 0.185" more offset than the straight neck (no offset) adapter and 0.185" less than the plumber's neck adapter (full offset).
Answer by: Richard Lin on Aug 2, 2013, 10:08 AM
can these be bent/adjusted for lie/offset?
Question by: john on Aug 12, 2013, 8:21 AM
John,

The are constructed from 431 stainless, so from a material standpoint could be bent. From a practical side, they may not as you are relying on the little over 1/2" post to absorb all the force after it has been epoxied into place.
Answer by: Richard Lin on Aug 13, 2013, 8:08 AM
Can these putter hosel adapters be bent once installed to accommodate adjustments in loft and lie?
Question by: Phil on Mar 12, 2013, 12:56 PM
Phil:

The hosel pieces are made of stainless steel, which are normally bendable. You are going to have to tighten the screws securely and make sure you have a very good putter bending machine that will not allow the head to move when you attempt to bend the hosel. I doubt you can change the loft, but you may have a chance to adjust the lie slightly.
Answer by: Richard Lin on Mar 13, 2013, 12:03 PM
Can this be used on a LH putter for the conversion i.e. turned 180 deg around?
Question by: Mike on Sep 5, 2013, 6:00 PM
Mike,

It was designed as a RH product only. If you did place it into a LH putter with a 90 degree socket, it would create negative offset.
Answer by: Richard Lin on Sep 6, 2013, 6:09 PM
How deep is the bottom post? I.E. how far into the putter head is it able to go?
Question by: David on May 18, 2017, 11:05 AM
David,

The depth that this product goes into a socket is 0.55".
Answer by: Richard Lin on May 19, 2017, 11:05 AM
What size shaft is needed for this adapter?
Question by: Andrew on Aug 15, 2017, 4:58 AM
Andrew,

These will accept a standard 0.370" parallel tip shaft.
Answer by: Richard Lin on Aug 16, 2017, 4:08 AM
Hi, would this fit on the Taylormade TP Collection Berwick? I want to change the putter from face balanced to slight toe hang. Would this hosel help to achieve that? Thank you.
Question by: Samuel Tan on Jan 21, 2021, 10:40 PM
The Slant Hosel Putter Adapter works in a right-handed putter with a 90 degree socket. I believe the Berwick has a post the shaft fits over so there would be no place to insert the adapter.
Answer by: Jeff Summitt on Jan 22, 2021, 5:38 AM
Would this fit on a scotty select squareback? Im not sure and want to confirm before buying?
Question by: Gabe on Mar 30, 2024, 2:31 PM
I believe the Select Squareback putter has a post that the shaft fits over so this product will not fit. The slant putter adapter will only work on right handed putters with a 0.370" socket that is bored 90 degrees into the head.
Answer by: Jeff Summitt (Admin) on Mar 31, 2024, 5:29 AM
Will this fit a odyssey white hot #7 putter?
Question by: Mick on May 10, 2024, 4:38 PM
You may need to send me a picture of the exact model you have as there are several of white hot #7 putters made. Most that had the bent putter shaft had the shaft fit over a post. Our slant hosel will only go into putters with a 0.370" socket that has been bored perpendicular or at a 90 degree angle.
Answer by: Jeff Summitt (Admin) on May 11, 2024, 4:48 AM
Shipping and warranty

CONTINENTAL U.S.

Delivery in the 48 contiguous United States only, excluding Alaska and Hawaii.

Processing Time

Next Day / 2nd Day / 3rd Day Delivery orders may take up to 1 business day of processing prior to shipping. Standard Ground Shipping orders may take up to 3 business days of processing prior to shipping. You will be emailed with the tracking number once it ships out.

Standard Ground

$7.95 per order Flat Rate*.  Estimated delivery in 5-7 business days.  Not a guaranteed service.

3 Day Delivery

$14.95 per order Flat Rate*.  Deliver in 3 business days by 4:30 p.m. to most areas (by 7 p.m. to residences).  Does not include weekends or holidays.  3-Day Delivery is not a guaranteed service. Hireko is not responsible for delays on packages, no refunds will be issued.

2 Day Delivery

$21.95 per order Flat Rate*.  Deliver in 2 business days by 4:30 p.m. to most areas (by 7 p.m. to residences).  Does not include weekends or holidays. 2-Day Delivery is not a guaranteed service. Hireko is not responsible for delays on packages, no refunds will be issued.

Next Day Delivery

Price based on weight and destination.  Deliver the next business day by 3 p.m. to most areas.  Does not include weekends or holidays. 

 * Flat rate shipping does not apply to customers with special pricing arrangements (check with your sales rep for details).  Some items may not be applicable for flat rate shipping, including bags, box sets and other oversize products. Packaged/Boxed Sets do not qualify for 2nd day or 3 day air shipping.

 

ALASKA & HAWAII

Flat rate is not available for Alaska & Hawaii.  All shipping is based on weight and destination.

Processing Time

Next Day / 2nd Day Delivery orders may take up to 1 business day of processing prior to shipping. Standard Ground Shipping orders may take up to 3 business days of processing prior to shipping. You will be emailed with the tracking number once it ships out.

Standard Post Office Mail

Estimated delivery in 3-7 business days.  Not a guaranteed service.  Does not include weekends or holidays. 

2 Day Delivery

Deliver in 2 business days.  Not a guaranteed service.  Does not include weekends or holidays. Hireko is not responsible for delays on packages, no refunds will be issued.

Next Day Delivery

Deliver the next business day.  Not a guaranteed service.  Does not include weekends or holidays. Hireko is not responsible for delays on packages, no refunds will be issued.

 

INTERNATIONAL

International shipping rates are determined by weight, dimension and zone. Please contact our customer support team for a quote. All orders from outside the United States must be pre-paid in US dollars and are subject to normal import duty, taxes and customs clearance charges in the destination country. If a customer refuses shipment due to duties and taxes, they will be liable for any costs incurred by Hireko Golf.

If your shipment arrives damaged please contact [email protected] or call 1-626-330-5525 and we will assist you in replacing it. In the event that you would like to return any merchandise purchased from Hireko Golf that is not damaged or defective, you will be responsible for any shipping cost you may incur.

 

MISCELLANEOUS CHARGES

Address Correction Fees

Hireko is not responsible for fees charged by Fedex, UPS, Post Office or other shippers in instances where the customer provides Hireko with incorrect ship to or bill to address information (Street, City, State, Zip Code, etc.). Shipper correction fees will be the responsibility of the customer and the customer will therefore be charged for such fees.

These correction fees are applicable on orders generated from the following sources: phone orders, internet, email, regular postal mail, fax, edi, or other electronic means.

 

WARRANTY

The manufacturer warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the original invoice date. The manufacturer agrees, at its option during the warranty period, to repair any defect in material or workmanship or to furnish a repaired or refurbished product of equal value in exchange without charge. The customer is responsible for freight to Hireko to return the defective product. Hireko will return the replacement product (or returned product if not deemed under warranty) at no charge. Claims are subject to verification of the defect or malfunction. Submit clear pictures and proof of purchase confirmed by the original dated sales receipt for us to decide if the product will be covered under warranty prior to shipping your repair back to us for inspection. Products not purchased directly from Hireko or hirekogolf.com must be returned to the original retailer. Warranty claims may take up to 45 days to process from time of receipt.

This warranty does not cover:

  • Normal wear and tear
  • Any condition resulting from other than ordinary residential wear or any use for which the product was not intended, such as use in rental or contract trade or commercial use.
  • Any condition resulting from incorrect or inadequate maintenance or care.
  • Damage resulting from misuse, abuse, negligence, or accidents.
  • Product loss or theft
  • Any alterations made to the product not specifically intended by the product's design, including cosmetic and structural changes.
  • Dissatisfaction due to buyer’s remorse
  • Damages incurred during transportation.
  • Damages incurred during assembly or maintenance.
  • Clubhead dents anywhere except on the face of a club.
  • Shafts broken in the middle of the club.
  • Custom golf clubs ordered online cannot be returned if they do not fit the golfer; buyer assumes the risk when ordering.
  • Chipped paint or scuff marks
  • Clubhead cracks not made from clubface contact.

To make a warranty claim, please email [email protected] or call 1(626)330-5525.

Customer Reviews
Only registered users can write reviews. Please Sign in or create an account