Customer Service (800) 367-8912     Tech Support (800) 942-5872
$44.99reg $44.99
    UST-Mamiya Recoil 95 Taper Tip Graphite Iron Golf Shafts
    Model: USTRCT95

Product Name Price Qty
UST-Mamiya Recoil 95 Tapered Graphite - #2 Iron R
$44.99
In stock
UST-Mamiya Recoil 95 Tapered Graphite - #3 Iron R
$44.99
In stock
UST-Mamiya Recoil 95 Tapered Graphite - #4 Iron R
$44.99
In stock
UST-Mamiya Recoil 95 Tapered Graphite - #5 Iron R
$44.99
In stock
UST-Mamiya Recoil 95 Tapered Graphite - #6 Iron R
$44.99
In stock
UST-Mamiya Recoil 95 Tapered Graphite - #7 Iron R
$44.99
In stock
UST-Mamiya Recoil 95 Tapered Graphite - #8 Iron R
$44.99
In stock
UST-Mamiya Recoil 95 Tapered Graphite - #9 Iron R
$44.99
In stock
UST-Mamiya Recoil 95 Tapered Graphite - Wedge R
$44.99
In stock
UST-Mamiya Recoil 95 Tapered Graphite - #2 Iron S
$44.99
In stock
UST-Mamiya Recoil 95 Tapered Graphite - #3 Iron S
$44.99
In stock
UST-Mamiya Recoil 95 Tapered Graphite - #4 Iron S
$44.99
In stock
UST-Mamiya Recoil 95 Tapered Graphite - #5 Iron S
$44.99
In stock
UST-Mamiya Recoil 95 Tapered Graphite - #6 Iron S
$44.99
In stock
UST-Mamiya Recoil 95 Tapered Graphite - #7 Iron S
$44.99
In stock
UST-Mamiya Recoil 95 Tapered Graphite - #8 Iron S
$44.99
In stock
UST-Mamiya Recoil 95 Tapered Graphite - #9 Iron S
$44.99
In stock
UST-Mamiya Recoil 95 Tapered Graphite - Wedge S
$44.99
In stock
    
  • 0
$0.00
PLEASE NOTE: THIS IS A SPECIAL-ORDER ITEM AND IS DEPENDENT ON MANUFACTURER AVAILABILITY. PLEASE ALLOW ADDITIONAL PROCESSING AND SHIPPING TIME.


Click on the image above to enlarge

Details

Finally, a revolutionary technology that will change how you think about iron shafts. UST Mamiya’s new recoil iron shafts are a game changer. In the past, heavy weight graphite iron shafts felt dead and stiff. With UST Mamiya’s exclusive recoil technology, they have brought feel back into the shaft, while allowing players to hit a wide range of shots that result in better distance control and pin seeking accuracy.

By positioning over 19 different layers within the shaft, UST engineers were able to create a design that outperforms the best steel shafts in the market. Recoil shafts are constant weight designs, with balance points adjusted so there will be no drop off in swing weight when re-shafting your steel shafted irons. 0.355” taper tip only available in individual lengths from #2 iron to wedges.

Note: This is a special order item. Please allow for longer delivery time.

Customer Reviews

Items 1 to 25 of 25 total

per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register

    Questions on UST-Mamiya Recoil 95 Taper Tip Graphite Iron Golf Shafts

    Sort by Descending
    • From Louie at 10/5/2014 6:26 PM
      • Can I use them recoil 95 shafts with my ping g25 clubs??
      • Louie,

        Yes, the Recoil 95 taper tip irons will fit your Ping G25 irons and hybrids.
      • Do you find this question helpful?  Yes   No
    • From WRX143 at 10/8/2015 6:01 AM
      • Will these shafts in the 110 weight have a consistent frequency slope from PW to 2 iron? My current taper steel shafts take a big jump from the #7 to #8 and I have never hit the 7 iron well as a result, no matter how I orient the shaft. I play golf competively (amature) and need consistent performance.
      • WRX143,

        The UST Recoil shafts have a frequency slope similar to steel shafts rather than a flat-line or single frequency slope. In terms of consistency, to a certain degrees the final outcome will be based on how consistent the bottom of bore to ground line measurements and insertion depths of each club in your set as well as the final swingweight. Not knowing which set of steel shafts you have makes it difficult to troubleshoot what might be the issue.
      • Do you find this question helpful?  Yes   No

    Ask Your Own Question





    Back to the product page
    Model # Weight Flex Torque Butt Diameter Tip Diameter Raw Length Ball Flight Parallel Tip Trim Code UPC
    USTRCT95IR-355-4100 95 R 3.1 d 0.600 in 0.355" Tapered 41 in Mid 0 in IH19 849009002840
    USTRCT95IR-355-4050 95 R 3.1 d 0.600 in 0.355" Tapered 40.5 in Mid 0 in IH19 849009002833
    USTRCT95IR-355-4000 95 R 3.1 d 0.600 in 0.355" Tapered 40 in Mid 0 in IH19 849009002826
    USTRCT95IR-355-3950 95 R 3.1 d 0.600 in 0.355" Tapered 39.5 in Mid 0 in IH19 849009002819
    USTRCT95IR-355-3900 95 R 3.1 d 0.600 in 0.355" Tapered 39 in Mid 0 in IH19 849009002802
    USTRCT95IR-355-3850 95 R 3.1 d 0.600 in 0.355" Tapered 38.5 in Mid 0 in IH19 849009002796
    USTRCT95IR-355-3800 95 R 3.1 d 0.600 in 0.355" Tapered 38 in Mid 0 in IH19 849009002789
    USTRCT95IR-355-3750 95 R 3.1 d 0.600 in 0.355" Tapered 37.5 in Mid 0 in IH19 849009002772
    USTRCT95IR-355-3700 95 R 3.1 d 0.600 in 0.355" Tapered 37 in Mid 0 in IH19 849009002765
    USTRCT95IS-355-4100 95 S 3.1 d 0.600 in 0.355" Tapered 41 in Mid 0 in IH19 849009002932
    USTRCT95IS-355-4050 95 S 3.1 d 0.600 in 0.355" Tapered 40.5 in Mid 0 in IH19 849009002925
    USTRCT95IS-355-4000 95 S 3.1 d 0.600 in 0.355" Tapered 40 in Mid 0 in IH19 849009002918
    USTRCT95IS-355-3950 95 S 3.1 d 0.600 in 0.355" Tapered 39.5 in Mid 0 in IH19 849009002901
    USTRCT95IS-355-3900 95 S 3.1 d 0.600 in 0.355" Tapered 39 in Mid 0 in IH19 849009002895
    USTRCT95IS-355-3850 95 S 3.1 d 0.600 in 0.355" Tapered 38.5 in Mid 0 in IH19 849009002888
    USTRCT95IS-355-3800 95 S 3.1 d 0.600 in 0.355" Tapered 38 in Mid 0 in IH19 849009002871
    USTRCT95IS-355-3750 95 S 3.1 d 0.600 in 0.355" Tapered 37.5 in Mid 0 in IH19 849009002864
    USTRCT95IS-355-3700 95 S 3.1 d 0.600 in 0.355" Tapered 37 in Mid 0 in IH19 849009002857
    Shipping Length (inches) Shipping Width (inches) Shipping Height (inches) Shipping Weight (pounds)
    48 4 4 2