0.350" Wood Ferrules (Dozen) - All Questions
0.350" Wood Ferrules (Dozen)
$4.99
SKU
GDW4020-001
Is this the right ferrule for an Acer Velocity graphite shaft for my Leggera driver?
Question by: Andy on Oct 20, 2013, 6:13 PM
Andy,
The Acer Velocity shaft has a tip diameter of 0.335" so this ferrule will be to large. If you want one that is similar is color and size, then you want the model number FR1014-001. http://www.hirekogolf.com/ferrule-black-1-2-in-7197.html
The Acer Velocity shaft has a tip diameter of 0.335" so this ferrule will be to large. If you want one that is similar is color and size, then you want the model number FR1014-001. http://www.hirekogolf.com/ferrule-black-1-2-in-7197.html
Answer by: Richard Lin on Oct 21, 2013, 6:10 PM
Will this ferrule work with a 2009 TM burner driver?
Question by: Andrew on Nov 9, 2015, 12:32 PM
Andrew,
The ones you would want are the GDW5029 if using a 0.335" shaft and the GDW5030 for a 0.350" shaft. These have the flange that fits down into the counterbore where this item does not.
The ones you would want are the GDW5029 if using a 0.335" shaft and the GDW5030 for a 0.350" shaft. These have the flange that fits down into the counterbore where this item does not.
Answer by: Richard Lin on Nov 10, 2015, 12:11 PM
WILL THIS FIT MY PING G10 DRIVER?
Question by: BILL on Jan 23, 2016, 12:56 PM
Bill,
No, the ones you want are these:
http://www.hirekogolf.com/catalogsearch/result/?q=Ping+G10
The only difference is the size shaft you want to use.
No, the ones you want are these:
http://www.hirekogolf.com/catalogsearch/result/?q=Ping+G10
The only difference is the size shaft you want to use.
Answer by: Richard Lin on Jan 24, 2016, 12:01 PM
Will these work when replacing shaft on R7 driver new shaft is .350
Question by: Alan on Aug 24, 2017, 5:40 AM
Alan,
It will depend if part of the old ferrule remain in the hosel. The original ferrule would have had a collar that fit down inside a counterbore. If not, epoxy would have to fill in that gap when using this ferrule.
It will depend if part of the old ferrule remain in the hosel. The original ferrule would have had a collar that fit down inside a counterbore. If not, epoxy would have to fill in that gap when using this ferrule.
Answer by: Richard Lin on Aug 25, 2017, 5:08 AM
Is this the right ferrule for a Cleveland 400 launcher diver head ?
Question by: Lou on Aug 9, 2023, 3:34 PM
The information I found said that the Cleveland 400 launcher driver required a 0.350" shaft so that would be the correct ferrule.
Answer by: Jeff Summitt on Aug 10, 2023, 5:43 AM