Dynacraft Prophet CB Iron - Custom Assembled - All Questions
Dynacraft Prophet CB Iron - Custom Assembled
$0.00
SKU
XI3710A
What is the body material of the Prophet CB? Are they lie adjustable? If so, how many degrees?
Thank you.
Thank you.
Question by: golfer mike on Nov 22, 2014, 11:26 AM
Golfer Mike,
The body material is 431 stainless and they are bendable +/-2 degrees from the published specification.
The body material is 431 stainless and they are bendable +/-2 degrees from the published specification.
Answer by: Richard Lin on Nov 23, 2014, 11:11 AM
How do the Prophet CBs compare to the Acer XV standard irons? Are they aimed at the same level of golfer?
Thanks.
Thanks.
Question by: Michael on Apr 10, 2015, 12:24 PM
Michael,
Both are aimed for a wide array of golfers. The key difference is the Prophet CB is designed for enhanced performance and greater distance.
Both are aimed for a wide array of golfers. The key difference is the Prophet CB is designed for enhanced performance and greater distance.
Answer by: Richard Lin on Apr 11, 2015, 12:04 PM
When trying to order the Dynacraft Prophet CB the order site lets me change everything except the lie. Why?
Question by: Gary on Feb 28, 2016, 5:14 PM
Gary,
We no longer offer the lie adjustment on this model as we have had difficult bending them without issues.
We no longer offer the lie adjustment on this model as we have had difficult bending them without issues.
Answer by: Richard Lin on Feb 29, 2016, 5:03 PM
Can the cb irons be bent to change degree of loft? If no, what iron do you suggest that loft can be changed?
Thanks
Thanks
Question by: Howard Friedlander on Oct 4, 2016, 7:01 AM
Howard,
This is the only iron where lie or loft cannot be altered. If you are looking for the next highest performance iron we offer that is bendable, that would be the Power Play Warp Speed. But please note, we do not offer the service of bending for loft, only lie on most of our irons and wedges.
This is the only iron where lie or loft cannot be altered. If you are looking for the next highest performance iron we offer that is bendable, that would be the Power Play Warp Speed. But please note, we do not offer the service of bending for loft, only lie on most of our irons and wedges.
Answer by: Richard Lin on Oct 5, 2016, 7:10 AM
Hello. What is the width of those irons. For 4i for example and for 9i. Thank a lot
Question by: ROMUALD sapet on Oct 29, 2016, 1:53 PM
Romuald,
Normally we provide the sole width of the 5-iron for each of our irons - in this case 23mm. The remainder is the same for this set of irons.
Normally we provide the sole width of the 5-iron for each of our irons - in this case 23mm. The remainder is the same for this set of irons.
Answer by: Richard Lin on Oct 30, 2016, 1:10 PM
The grooves seem a little small and shallow. Did you do this on purpose?
Question by: Randy Collins on Mar 8, 2017, 6:46 AM
Randy,
They are no different from any of our other irons. Perhaps there is more paint inside the grooves to make it look that way.
They are no different from any of our other irons. Perhaps there is more paint inside the grooves to make it look that way.
Answer by: Richard Lin on Mar 9, 2017, 6:03 AM
What are the standard lengths of these irons? Not shown in the specs......
Thanks
Thanks
Question by: Andrew Kitchen on Apr 4, 2017, 7:23 PM
Andy,
Starting with the 3-iron 39", 4-iron 38.5", 5-iron 38", 6-iron 37.5", 7-iron 37", 8-iron 36.5", 9-iron 36", PW and GW 35.5" and SW 35.25". These are with steel. For graphite shafts the lengths are 1/2" longer.
Starting with the 3-iron 39", 4-iron 38.5", 5-iron 38", 6-iron 37.5", 7-iron 37", 8-iron 36.5", 9-iron 36", PW and GW 35.5" and SW 35.25". These are with steel. For graphite shafts the lengths are 1/2" longer.
Answer by: Richard Lin on Apr 5, 2017, 7:04 PM
Is this a true update that the CB irons can nooner be adjusted to a +2 lie?
Question by: León Feldbrill on Apr 8, 2017, 7:11 AM
Leon,
That is correct, we no longer offer the service of bending these irons.
That is correct, we no longer offer the service of bending these irons.
Answer by: Richard Lin on Apr 9, 2017, 7:04 AM
My current irons are fitted with apollo acculite 85 shafts in regular flex with an additional 1/4 inch tip lenght to come in at the lower end of regular flex, and butt trimmed to standard length. Not sure what loft current irons are, as there are no markings on clubhead to indicate loft. Given the stronger loft of these clubheads, do you think they will still provide a mid to higher ball flight. Wil still be keeping these shafts. Thanks,,,Joe
Question by: Joe on Jun 13, 2017, 7:45 PM
Joe,
It is impossible to say without know what iron (loft) you are using now. The face is thinner on these irons which saves weight that can be used to lower and move the center of gravity back to help launch the ball higher and thus the need for stronger lofts.
It is impossible to say without know what iron (loft) you are using now. The face is thinner on these irons which saves weight that can be used to lower and move the center of gravity back to help launch the ball higher and thus the need for stronger lofts.
Answer by: Richard Lin on Jun 14, 2017, 7:06 PM
