Pinhawk SLH (Single Length) Hybrid - Clubhead - All Questions
Pinhawk SLH (Single Length) Hybrid - Clubhead
SKU
VIW1289AU
what would the difference be between your pinhead golf clubs versus the 1iron golf system I tried them and lost to much distance between 4 5 and 6 clubs ths
Question by: cliff on Oct 5, 2016, 12:26 PM
Cliff,
I am not aware that 1-Iron golf had any true hybrids as all I saw on their site was wide soled irons. The Pinhawk SLH hybrids are a true hybrid built like a small metal wood.
I am not aware that 1-Iron golf had any true hybrids as all I saw on their site was wide soled irons. The Pinhawk SLH hybrids are a true hybrid built like a small metal wood.
Answer by: Richard Lin on Oct 6, 2016, 12:10 PM
I built a set of Pinhawk Irons 5 - PW and the product info said make them 37" long
so I did and I used senior graphite shafts. Now I bought the 4 hybrid head and I see that it said 37" (steel). Should I have not used graphite? or made them 371/2" long?
Is a 37" graphite shaft going to work for the Pinhawk 4 hybrid head I bought?
Thanks, Greg
so I did and I used senior graphite shafts. Now I bought the 4 hybrid head and I see that it said 37" (steel). Should I have not used graphite? or made them 371/2" long?
Is a 37" graphite shaft going to work for the Pinhawk 4 hybrid head I bought?
Thanks, Greg
Question by: Greg on Oct 31, 2016, 5:29 PM
Greg,
If you have the irons at 37" long with the graphite shafts and you are hitting them fine, then I would make the matching hybrid the same length if using the same shaft and grip. Normally we would make the graphite 1/2" longer to achieve a normal swingweight, but length is more important.
If you have the irons at 37" long with the graphite shafts and you are hitting them fine, then I would make the matching hybrid the same length if using the same shaft and grip. Normally we would make the graphite 1/2" longer to achieve a normal swingweight, but length is more important.
Answer by: Richard Lin on Nov 1, 2016, 5:11 PM
are the hybrid clubheads bendable for lie angle? I find them a little upright for my swing and would like to flatten them a degree or two.
Thanks,
Steve
Thanks,
Steve
Question by: Steve on Dec 25, 2016, 11:37 AM
Steve,
We have not tried as our bending machine doesn't have the hybrid attachment to even attempt.
We have not tried as our bending machine doesn't have the hybrid attachment to even attempt.
Answer by: Richard Lin on Dec 26, 2016, 11:12 AM
What materials are the hybrids made of?
Question by: Tom on Mar 26, 2017, 1:25 PM
Tom,
They are manufactured from 431 stainless steel.
They are manufactured from 431 stainless steel.
Answer by: Richard Lin on Mar 27, 2017, 1:03 PM
I see on Pinhawk's own website that they now make one LEFT HANDED Hybrid (#4 @ 20*).
Will Hireko golf be offering this LH Hybrid soon? Please, pls......
Thank you
Will Hireko golf be offering this LH Hybrid soon? Please, pls......
Thank you
Question by: David on Oct 2, 2017, 2:25 PM
David,
We will probably pick it up, but not the soon part.
We will probably pick it up, but not the soon part.
Answer by: Richard Lin on Oct 3, 2017, 2:10 PM
Why isn’t there a 3-hybrid in the set? I use my Adams 3-hybrid a lot, and the lack of one seems to be significant coverage gap. Thanks!
Question by: Ted Edwards on Apr 12, 2021, 6:15 AM
Ted,
Check the loft of your Adam's 3-hybrid as it might be the same or within a degree of the 20 degree Pinhawk SLH 4-hybrid. If there was a 3-hybrid in the set it would have been 15 or 16 degrees and too low for the average golfer to get airborne.
Check the loft of your Adam's 3-hybrid as it might be the same or within a degree of the 20 degree Pinhawk SLH 4-hybrid. If there was a 3-hybrid in the set it would have been 15 or 16 degrees and too low for the average golfer to get airborne.
Answer by: Jeff Summitt on Apr 12, 2021, 6:45 AM
Can I buy a fully assembled pinhawk slh 9 hybrid ? Senior flex , midsize grip, 37 1/2” ? Neoprene head cover for a 5 hybrid. Thanks!
Question by: Doug Wright on Apr 30, 2021, 1:05 PM
Yes, but you will need to go to the custom assembled page shown here: https://www.hirekogolf.com/pinhawk-slh-single-length-hybrid-rh-custom-assembled.html. You can change the stock grip, grip size, shaft, shaft flex and length using the drop down boxes.
Answer by: Jeff Summitt on Apr 30, 2021, 1:21 PM