SK Fiber Pro 115 Graphite Wedge/Putter Shaft, Satin Black - All Questions
SK Fiber Pro 115 Graphite Wedge/Putter Shaft, Satin Black
$17.99
SKU
NSD50115
To Trim the tip for a putter cut tip end 3" correct?
Question by: Brian on May 30, 2022, 11:53 AM
Brian,
For this product, it is butt trim only.
For this product, it is butt trim only.
Answer by: Jeff Summitt on May 31, 2022, 9:20 AM
I assume this will not fit over a putter post like a .370 steel shaft
Question by: Jake on Jul 6, 2022, 9:21 PM
That is correct, the walls will be too thick to fit over the post.
Answer by: Jeff Summitt on Jul 7, 2022, 5:37 AM
Given that the shaft is so heavy, why is the torque specification so high? I'd imagine a 115g shaft can do a lot better than 5.1 degrees of torque.
Question by: Dave Tutelman on Aug 2, 2022, 11:25 AM
Hi Dave,
Two reasons. One was to make it affordable as it needed to be a replacement for the steel shafts. Secondly and maybe more important, was feel and performance. We had some good player's hit the final samples and did not mention anything about dispersion.
Two reasons. One was to make it affordable as it needed to be a replacement for the steel shafts. Secondly and maybe more important, was feel and performance. We had some good player's hit the final samples and did not mention anything about dispersion.
Answer by: Jeff Summitt on Aug 2, 2022, 11:37 AM
How long is the parallel section?
Question by: A_corrs on Aug 22, 2022, 4:34 PM
The parallel tip section of the SK Fiber Pro 115 is 3" long.
Answer by: Jeff Summitt on Aug 23, 2022, 6:58 AM
Wedge flex is typically stiff, any more info on the stiffness/profile of this shaft would be appreciated? Wil it be included in the DFSI?
Thanks
Thanks
Question by: Chad on Feb 3, 2023, 3:06 PM
We tried to replicate the frequency of a stiff flex Dynamic Gold wedge flex as that was the most common wedge flex shaft in the industry.
Answer by: Jeff Summitt on Feb 4, 2023, 4:35 AM
I have a PGA T line Putter that’s old wondering if the shaft will fit it not sure if it’s 355 or 370 tip or something else wondered if you might know if it will fit. Thank you.
Question by: Bill on Dec 23, 2024, 9:20 PM
Bill,
We cannot find out what the tip diameter of the shaft in the PGA T Line putter is. You will have to remove the shaft and measure the tip. This shaft will fit assuming, 1), the shaft goes into a hosel and it is not an over-the-hosel or post installation. Second, if it is taper tip, this shaft has a very thick tip section and can be sanded down to form the taper.
We cannot find out what the tip diameter of the shaft in the PGA T Line putter is. You will have to remove the shaft and measure the tip. This shaft will fit assuming, 1), the shaft goes into a hosel and it is not an over-the-hosel or post installation. Second, if it is taper tip, this shaft has a very thick tip section and can be sanded down to form the taper.
Answer by: Jeff Summitt (Admin) on Dec 24, 2024, 5:36 AM
