SK Fiber Tour Trac 55 Graphite Wood Golf Shafts - All Questions

SK Fiber Tour Trac 55 Graphite Wood Golf Shafts
SK Fiber Tour Trac 55 Graphite Wood Golf Shafts
Set Descending Direction
I am looking to know what the swing speed are for R & S SK Fiber shafts. I am kind of in between the two. Please let me know. Thanks.
Question by: James on Nov 19, 2015, 10:14 AM

I you are worried you are in-between flexes, then the Tour Trac 55 will allow you to create that. Use the R-flex and trim an extra 1" off of the tip for a little lower ball flight or take the S-flex and trim 1" less off the tip for a higher ball flight.
Answer by: Richard Lin on Nov 20, 2015, 10:11 AM
Hi Jeff
What would the swing speed ranges be on the Tour Trac 55 A flex wood shaft. Thanks Mik
Question by: Mik Neville on Aug 8, 2016, 2:25 PM

I would look at 74 - 91 mph depending upon which trim chart you use.
Answer by: Richard Lin on Aug 9, 2016, 2:08 PM
Here is a DSFI related question. Say you find an SK Fiber iron shaft that seems to work very well for you. Then look up the DSFI number for that shaft. Does this translate into driver shafts? If I get a driver shaft with the same approximate DSFI with the shaft weight I am looking for, should it work well for me?
Question by: Tom Drew on Oct 16, 2020, 11:50 AM
In theory yes. However, I have seen golfer's who possess more of an aggressive swing with their driver (and/or fairway woods) and more of a deliberate swing for their irons and wedges. If that was the case, then you might need a shaft with a higher DSFI for the woods. But if the tempo is the same for all clubs, then it is reasonable to find a wood shaft with a similar DSFI. Make sure to look at the tables in Chapter 5 of the Shaft Fitting Addendum.
Answer by: Jeff Summitt on Oct 16, 2020, 11:58 AM

3 Item(s)

Show per page