Synchron Vespa Iron - Clubhead - All Questions
Synchron Vespa Iron - Clubhead
SKU
I36601
what type of metal is used?
Question by: KEN FLETCHER on Mar 23, 2015, 3:37 PM
Ken,
This iron is constructed of 431 stainless steel.
This iron is constructed of 431 stainless steel.
Answer by: Richard Lin on Mar 24, 2015, 3:03 PM
Are these Vespar iron heads suitable for graphite shafts?
Thanks,
Roger
Thanks,
Roger
Question by: Roger Sunn on May 29, 2015, 9:35 AM
Roger,
Yes, they are suitable for 0.370" parallel tip graphite shafts. The key is to find a graphite shaft that suits the player for the correct weight, flex and bend point.
Yes, they are suitable for 0.370" parallel tip graphite shafts. The key is to find a graphite shaft that suits the player for the correct weight, flex and bend point.
Answer by: Richard Lin on May 30, 2015, 9:05 AM
These look very similar to the Acer Reacts, which were very nice irons. What are the differences between the Vespa and the React irons?
Question by: John on Aug 10, 2015, 6:57 AM
John,
The Acer React irons were one of our most reviewed and beloved irons of the past. When we retired the line, we brought it back into the Synchron Vespa line. The only changes made were a new medallion was created and we removed the small step along the back of the flange. From a playability standpoint they will be exactly the same.
The Acer React irons were one of our most reviewed and beloved irons of the past. When we retired the line, we brought it back into the Synchron Vespa line. The only changes made were a new medallion was created and we removed the small step along the back of the flange. From a playability standpoint they will be exactly the same.
Answer by: Richard Lin on Aug 11, 2015, 6:08 AM
can these heads be bent 2 degrees upright? i don't see the option.
Question by: Frank on Jan 8, 2016, 6:31 AM
Frank,
Yes they can. It is fixed so you can have that option now.
Yes they can. It is fixed so you can have that option now.
Answer by: Richard Lin on Jan 9, 2016, 6:01 AM
Do you recommend a special graphite shaft for these irons?
Question by: V.J. on Jan 27, 2016, 8:39 AM
V.J.,
These take any 0.370" parallel tip shaft. Just make sure the weight (for tempo), stiffness (for strength) and bend point (for ball trajectory) are suited for your game.
These take any 0.370" parallel tip shaft. Just make sure the weight (for tempo), stiffness (for strength) and bend point (for ball trajectory) are suited for your game.
Answer by: Richard Lin on Jan 28, 2016, 8:01 AM
I've read and heard a lot of great things about the Vespa irons (and the similar previous Acer React irons). I know that Hireko Golf does not produce "clones", but I can't help but notice that they resemble, and on other golf websites compared to, the Callaway Diablo Edge irons. I have a Diablo Edge 4 iron which I like very much, especially the wide sole which makes it very playable for a mid-handicapper like me. My Diable Edge 4 iron has a middle sole width of ~30 mm. Do the Vespa iron heads have a similar sole that I would be happy with, and saving me the much higher cost for a set of Callaway Diablo Edge irons? Thanks! Ed
Question by: Ed in NM on Jul 10, 2016, 1:01 PM
Ed,
The Vespa iron was the Acer XDS React previously with a new medallion and before that was Power Play System Q2 with a different back. So it has been a popular iron in our line for many years. The sole width on the 5-iron is 22 mm.
The Vespa iron was the Acer XDS React previously with a new medallion and before that was Power Play System Q2 with a different back. So it has been a popular iron in our line for many years. The sole width on the 5-iron is 22 mm.
Answer by: Richard Lin on Jul 11, 2016, 1:07 PM
-
![Synchron Vespa Fairway Wood - Clubhead]()
Synchron Vespa Fairway Wood - ClubheadStarting at $16.95
-
![Synchron Vespa Hybrid - Clubhead]()
Synchron Vespa Hybrid - ClubheadStarting at $14.95
