Acer XV Hybrid - Clubhead - All Questions

Acer XV Hybrid - Clubhead

SKU

FIWC1264

Will there be different weights available to purchase for all the XV wood heads?

Question by: Jeff on Feb 27, 2015, 5:13 PM

Jeff,

Yes there will be additional 2g and 12g weights as the stock weight is 7 grams. You can find the link to the screws if you scroll down below the description and look under related products.

Answer by: Richard Lin on Feb 28, 2015, 5:03 PM

Im looking to fill a gap between my 5 wood and 3 iron...due to the shorter length of the 3 hybrid compared to the 5 wood with basically the same loft shouldnt i hit the hybrid a shorter distance, or would i be better off going with a 4 hybrid

Question by: jonathan on May 28, 2015, 1:55 PM

Jonathan,

You would be best off with a 3 hybrid or 7 wood.

Answer by: Richard Lin on May 29, 2015, 1:05 PM

Are these hybrids bendable for lie adjustment and, if so, how much?

Thanks!

Question by: Bob on Jul 8, 2015, 9:20 AM

Bob,

We do not offer the service of bending hybrids so I am not certain if they can be bent and to what degree.

Answer by: Richard Lin on Jul 9, 2015, 9:07 AM

Do these heads require the oversize iron ferrule?

Question by: Bruce on Aug 4, 2015, 6:05 AM

Bruce,

These will take the standard iron ferrule.

Answer by: Richard Lin on Aug 5, 2015, 6:08 AM

Do these hybrids have any type of draw/fade bias do they set up square? If they have a bias, can you point me to a model that is neutral?

Question by: Mark on Feb 1, 2016, 10:25 AM

Mark,

The face angle is square. These do have a semi-offset hosel which could be considered neutral depending upon your reference point. For instance the Acer XDS, XF (standard version) and the Synchron Vespa all have full face progression like a fairway wood. Some may say these are "neutral" and others fade biased.

Answer by: Richard Lin on Feb 2, 2016, 10:02 AM

What is the face height of these hybrid club heads?

Question by: Kevin Gonyo on Feb 12, 2016, 6:07 AM

Kevin,

It is 34mm.

Answer by: Richard Lin on Feb 13, 2016, 6:02 AM

What is the face height of the 3 hybrid?

Question by: John on Feb 29, 2016, 12:01 PM

34mm

Answer by: Richard Lin on Mar 1, 2016, 12:03 PM

What type of steel is the body and cup face made of?

Thanks

Ron

Question by: Ron on Apr 24, 2016, 9:37 AM

Ron,

It is made of 17-4 stainless.

Answer by: Richard Lin on Apr 25, 2016, 9:04 AM

what is loft degree for # 3 hybrid?

Question by: Chris on Aug 25, 2016, 2:42 PM

Chris,

It is 19 degrees. You can click on the tab above the description that says Specifications and you can see the full set of specs for these heads.

Answer by: Richard Lin on Aug 26, 2016, 2:08 PM

Two Question

-What lengths would be recommended for these hybrids?

-Would the Recoil .370 shafts be a good match for these heads. If not what are your recommendations

Question by: Mo Knows on Oct 24, 2016, 8:14 PM

Mo Knows,

Standard men's lengths with graphite shafts would be 40" (#3), 39.5" (#4) and 39" (#5) respectively with the stock 7g screw. If you opt for the optional 12 gram screw you can make the clubs 1/2" shorter and converselt with the optional 2g screw you can make the club 1/2" longer.

As far as shafts, the Recoil 0.370" iron shafts will fit inside our hybrid hosels. Now whether or not the shaft fits you is a different issue since we do not have any information about your swing, what you have used well in the past, etc.

Answer by: Richard Lin on Oct 25, 2016, 8:10 PM