Model # | Weight | Flex | Torque | Butt Diameter | Tip Diameter | Raw Length | Ball Flight | Parallel Tip | Trim Code | UPC |
APGSH2FL-001-WAL | 55 | A/L | 6.5° | 0.585" | 0.335" Parallel | 46" | High | 5" | L:_W7 / A:_W4 | 852674727437 |
APGSH2FL-001-WRS | 55 | R/S | 6.5° | 0.585" | 0.335" Parallel | 46" | High | 5" | R:_W7 / S:_W4 | 852674727444 |
APGSH2FL-001-IAL | 55 | A/L | 5.0° | 0.580" | 0.370" Parallel | 40" | High | 5" | L:_IH7 / A:_IH10 | 852674727413 |
APGSH2FL-001-IRS | 55 | R/S | 5.0° | 0.580" | 0.370" Parallel | 40" | High | 5" | R:_IH7 / S:_IH10 | 852674727420 |
Product Questions
For an R-flex driver, all material would be taken off of the butt end. For stiff flex, you would tip trim 1" and then butt trim to length.
Thanks.
The Acer XF hybrids weigh the same as the corresponding numbered iron. So if you are trimming the shafts for the #3 hybrid, treat this as if were a 3-iron for both tip trimming and length. In this case 0.5" tip trim and 39.5" for men's standard length. The H1 and H2 designations were for special lightweight hybrids that required a 0.370" or 0.355" taper tip shaft and were lighter than even a 1-iron. Those are rare to find, but they did exist, therefore we needed to add them to the chart just in case a customer encountered one.
Thank you
If you bought the A/L wood shaft, then tip trim 1" for a senior flex driver.
Thanks
You will need to weigh the head. You would treat the club for tip trimming and length as a 3-iron only if the head weighs the same as a 3-iron (@242 grams). I believe it will be less though. If the weight is closer to 235g, treat as a 2-iron and if closer to 229g, treat as a 1-iron.
That shaft will not fit without some sort of shim, plus you will have an issue with a ferrule fitting flush with the OD of the hosel. Plus, I can't tell you how much to trim unless I know what the head weight is.
That is the same weight as a 7-wood so we would recommend tip trimming 2.5" for A-flex.
Both weigh 216 gr.
tip and length for both.
Thanks
Are these using a 0.335" or 0.370" shaft? And what flex do you want to end up with since these are combination flex shafts?
Another web site shows 2" for driver and 2.5" for three wood (senior)
Would you please address this dilemma.
Thanks
Our website is correct. By trimming as per the suggested tip trimming it makes the frequencies fall in line with the Shadow UL. You can certainly tip trim 1" more and that will change the frequency by 5 cpm or about a half a flex.
both are .370 and I want to end up with senior flex.
Thanks
For senior flex, both would be 1" tip trimming and a overall length of 40.75 or possibly 40.5" since both weigh the same. Please note, the shaft length is only 40", so when you tip trim the shaft and put it back into the head with the grip cap, you may be 40" to possibly 40.5" depending on the bottom of bore to ground line measurement. So you may need an extender to get to your desired length.
The Apollo Shadow FL will be lighter. The Shadow UL might be closer to the specs of the shaft you referred to.
CONTINENTAL U.S.
Delivery in the 48 contiguous United States only, excluding Alaska and Hawaii.
Processing Time
Next Day / 2nd Day / 3rd Day Delivery orders may take up to 1 business day of processing prior to shipping. Standard Ground Shipping orders may take up to 3 business days of processing prior to shipping. You will be emailed with the tracking number once it ships out.
Standard Ground
$7.95 per order Flat Rate*. Estimated delivery in 5-7 business days. Not a guaranteed service.
3 Day Delivery
$14.95 per order Flat Rate*. Deliver in 3 business days by 4:30 p.m. to most areas (by 7 p.m. to residences). Does not include weekends or holidays. 3-Day Delivery is not a guaranteed service. Hireko is not responsible for delays on packages, no refunds will be issued.
2 Day Delivery
$21.95 per order Flat Rate*. Deliver in 2 business days by 4:30 p.m. to most areas (by 7 p.m. to residences). Does not include weekends or holidays. 2-Day Delivery is not a guaranteed service. Hireko is not responsible for delays on packages, no refunds will be issued.
Next Day Delivery
Price based on weight and destination. Deliver the next business day by 3 p.m. to most areas. Does not include weekends or holidays.
* Flat rate shipping does not apply to customers with special pricing arrangements (check with your sales rep for details). Some items may not be applicable for flat rate shipping, including bags, box sets and other oversize products. Packaged/Boxed Sets do not qualify for 2nd day or 3 day air shipping.
ALASKA & HAWAII
Flat rate is not available for Alaska & Hawaii. All shipping is based on weight and destination.
Processing Time
Next Day / 2nd Day Delivery orders may take up to 1 business day of processing prior to shipping. Standard Ground Shipping orders may take up to 3 business days of processing prior to shipping. You will be emailed with the tracking number once it ships out.
Standard Post Office Mail
Estimated delivery in 3-7 business days. Not a guaranteed service. Does not include weekends or holidays.
2 Day Delivery
Deliver in 2 business days. Not a guaranteed service. Does not include weekends or holidays. Hireko is not responsible for delays on packages, no refunds will be issued.
Next Day Delivery
Deliver the next business day. Not a guaranteed service. Does not include weekends or holidays. Hireko is not responsible for delays on packages, no refunds will be issued.
INTERNATIONAL
International shipping rates are determined by weight, dimension and zone. Please contact our customer support team for a quote. All orders from outside the United States must be pre-paid in US dollars and are subject to normal import duty, taxes and customs clearance charges in the destination country. If a customer refuses shipment due to duties and taxes, they will be liable for any costs incurred by Hireko Golf.
If your shipment arrives damaged please contact [email protected] or call 1-626-330-5525 and we will assist you in replacing it. In the event that you would like to return any merchandise purchased from Hireko Golf that is not damaged or defective, you will be responsible for any shipping cost you may incur.
MISCELLANEOUS CHARGES
Address Correction Fees
Hireko is not responsible for fees charged by Fedex, UPS, Post Office or other shippers in instances where the customer provides Hireko with incorrect ship to or bill to address information (Street, City, State, Zip Code, etc.). Shipper correction fees will be the responsibility of the customer and the customer will therefore be charged for such fees.
These correction fees are applicable on orders generated from the following sources: phone orders, internet, email, regular postal mail, fax, edi, or other electronic means.
WARRANTY
The manufacturer warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the original invoice date. The manufacturer agrees, at its option during the warranty period, to repair any defect in material or workmanship or to furnish a repaired or refurbished product of equal value in exchange without charge. The customer is responsible for freight to Hireko to return the defective product. Hireko will return the replacement product (or returned product if not deemed under warranty) at no charge. Claims are subject to verification of the defect or malfunction. Submit clear pictures and proof of purchase confirmed by the original dated sales receipt for us to decide if the product will be covered under warranty prior to shipping your repair back to us for inspection. Products not purchased directly from Hireko or hirekogolf.com must be returned to the original retailer. Warranty claims may take up to 45 days to process from time of receipt.
This warranty does not cover:
- Normal wear and tear
- Any condition resulting from other than ordinary residential wear or any use for which the product was not intended, such as use in rental or contract trade or commercial use.
- Any condition resulting from incorrect or inadequate maintenance or care.
- Damage resulting from misuse, abuse, negligence, or accidents.
- Product loss or theft
- Any alterations made to the product not specifically intended by the product's design, including cosmetic and structural changes.
- Dissatisfaction due to buyer’s remorse
- Damages incurred during transportation.
- Damages incurred during assembly or maintenance.
- Clubhead dents anywhere except on the face of a club.
- Shafts broken in the middle of the club.
- Custom golf clubs ordered online cannot be returned if they do not fit the golfer; buyer assumes the risk when ordering.
- Chipped paint or scuff marks
- Clubhead cracks not made from clubface contact.
To make a warranty claim, please email [email protected] or call 1(626)330-5525.