Shaft Extenders for Graphite and Steel Shafts

Grouped product items
Product Name Qty
Graphite Golf Shaft Extender - Lime Green (.470" OD) SKU:PGGSE-470-LG
$3.49
Out of stock
Graphite Golf Shaft Extender - White (.485" OD) SKU:PGGSE-485-WH
$3.49
In stock
Graphite Golf Shaft Extender - Blue (.490" OD) SKU:PGGSE-490-BL
$3.49
In stock
Graphite Golf Shaft Extender - Pink (.495" OD) SKU:PGGSE-495-PK
$3.49
In stock
Graphite Golf Shaft Extender - Gold (.500" OD) SKU:PGGSE-500-GD
$3.49
In stock
Graphite Golf Shaft Extender - Orange (.5075" OD) SKU:PGGSE-5075-OR
$3.49
In stock
Graphite Golf Shaft Extender - Yellow (.515" OD) SKU:PGGSE-515-YL
$3.49
In stock
Graphite Golf Shaft Extender - Green (.5225" OD) SKU:PGGSE-5225-GN
$3.49
In stock
Graphite Golf Shaft Extender - Red (.530" OD) SKU:PGGSE-530-RD
$3.49
In stock
Graphite Golf Shaft Extender - Copper (.5375" OD) SKU:PGGSE-5375-CP
$3.49
In stock
Graphite Golf Shaft Extender - Purple (.545" OD) SKU:PGGSE-545-PU
$3.49
In stock
Graphite Golf Shaft Extender - Black (.560" OD) SKU:PGGSE-560-BK
$3.49
In stock
Graphite Golf Shaft Extender - Silver (.575" OD) SKU:PGGSE-575-SI
$3.49
In stock
Graphite Golf Shaft Measuring Gauge SKU:PGGSMG
$7.99
In stock

Our shaft extenders for graphite and steel shafts are made of high-quality nylon blended plastic. They are designed to extend one club (maximum 2" for swing clubs). We recommend high-strength golf club epoxy to secure the shaft extension into butt end of the shaft and then cut to length once the epoxy is cured. The stem of these shaft extenders can be sanded down (generally no more than 0.020") to fit smaller openings. These will work with graphite shafts as well as the 3 largest models will fit 0.560", 0.580" and 0.600" steel shafts respectively.

Please note: The OD is the outside diameter of the extender's stem which fits the corresponding inside diameter of the shaft.

Watch the video on how to install shaft extenders below.

For further tips on how to install shaft extensions, click the link.

 

 

NO MORE SECOND GUESSING

Our shaft extenders for graphite and steel shafts fit virtually all graphite shafts as well as the most popular steel shaft sizes on the market today. No more second guessing, accurately determines the exact sized extender you need by measuring the inside diameter of the shaft's butt end. Color coded for different 13 sizes.

11 different sized shaft extenders

MEASURE WITH EASE

The Graphite Golf Shaft Measuring Gauge helps simplify and determine the correct shaft extension for the job.

Shaft measuring gauge showing color coding

ADAPTABILTY

Fits virtually all graphite shafts as well as the most popular steel shaft sizes.

13 different size shaft extenders with color coding on the tips
Specifications
Model # Weight UPC
PGGSE-470-LG 0.03  
PGGSE-485-WH 0.03 852674701482
PGGSE-490-BL 0.03 852674701499
PGGSE-495-PK 0.03 852674701505
PGGSE-500-GD 0.03 852674701512
PGGSE-5075-OR 0.03 852674701529
PGGSE-515-YL 0.03 852674701536
PGGSE-5225-GN 0.03 852674701543
PGGSE-530-RD 0.03 852674701550
PGGSE-5375-CP 0.03  
PGGSE-545-PU 0.03 852674701567
PGGSE-560-BK 0.03 852674701574
PGGSE-575-SI 0.03 852674701581
PGGSMG 0.03 852674701598

Product Questions

I have a ust recoil 660 shaft. Do you know what shaft extender would fit? Also would this shaft work for your xs hybrid or should I look at a hybrid shaft? Not sure what differences there are in shafts identified as hybrid versus iron shafts.
Question by: Sgtty on Oct 22, 2016, 4:16 AM
Sgtty,

I would recommend the PGGSE-515-YL as the best fitting model. Yes, you could use this shaft into our XS hybrid. Typically hybrid-specific shafts are designed for lighter and longer clubheads labeled as hybrids (typically no heavier than 256 grams).
Answer by: Richard Lin on Oct 23, 2016, 4:10 AM
Do you have a shaft extender that will work with a Junior graphite shaft. The O.D. shown on the literature for these junior clubs is 0.50. I do not know the ID of the shaft.
Question by: David on Oct 23, 2016, 7:17 PM
David,

Sorry, due to the varied sizes that can occur with a junior shaft, there are no commercially available extenders. Best option is to use hardwood dowels from a hardware store and size them to fit.
Answer by: Richard Lin on Oct 24, 2016, 7:10 PM
Hi,
Could you please tell me what shaft extender should I use for :
apollo FL wood shaft
acer velocity wood shaft

Thanks a lot.
Question by: Nicolas on Oct 12, 2017, 8:49 AM
Nicolas,

What flex in each?
Answer by: Richard Lin on Oct 13, 2017, 8:10 AM
Do you know which size extenders to use on a set of Taylor Made Rocketballz graphite irons?
Thank you.
Question by: Gary on Feb 20, 2017, 9:04 AM
Gary,

TaylorMade does not provide the specification for the inside diameter of their shafts (actually no graphite shaft maker does) so you will need to remove one of the grips and measure the ID of the shaft.
Answer by: Richard Lin on Feb 21, 2017, 9:02 AM
Looking for shaft extenders for a set of irons using True Temper XP105 shafts. What do you recommend?
Thanks!
(I would be very grateful if you could e-mail the reply to my account e-mail address as well.)
Question by: Robert Eye on May 24, 2017, 3:14 PM
Robert,

Use either the steel extender EX600-001 or if using the Parage extenders, the correct code would be PGGSE-560-BK.
Answer by: Richard Lin on May 25, 2017, 3:05 PM
Okay,

R flex for the 2 shafts

Thanks
Question by: Nicolas on Oct 12, 2017, 9:22 AM
Nicolas,

It is always best to measure them yourself because there is some tolerance, plus depending on how long or short the butt end, the dimensions can vary too. For the Velocity I would use the 0.490" and for the Shadow FL the 0.5225" diameter. If they are a little tight, the stem can be sanded down.
Answer by: Richard Lin on Oct 13, 2017, 9:10 AM
Will these be compatible with Hireko graphite counterweights? The CW's go too deep into the extensions I have on hand.
Question by: James Manning on Apr 30, 2024, 11:32 AM
Hi James,

Unfortunately, not. The wall diameters of the extenders are thicker than a typical graphite shaft for strength and the Hireko counterweight will be too large.
Answer by: Jeff Summitt (Admin) on Apr 30, 2024, 12:18 PM
I have Warrior Tour 3.1 golf clubs/graphite shafts. I need to extend the short irons about one inch, what size extenders do you recommend?
Question by: Robert Clark on Apr 26, 2021, 8:53 AM
Unfortunately, you need to remove the grip and measure the inside diameter of the shaft and select the model closest in size. This is not a specification that manufacturers post.
Answer by: Jeff Summitt on Apr 26, 2021, 10:52 AM
Hi,
I put a 0.470 extender in graphite shaft but it's a little thin inside the shaft. Is it possible to add grip tape on the extension that is inserted in the shaft to fit?
Thanks.
Question by: Nicolas on Jun 4, 2021, 5:23 AM
It depends on how much smaller it is versus the interior of the shaft. You could take masking tape approximately 1/4" wide and barber pole wrap it around the stem and test fit. If it is a little too loose, take another strip of masking tape and reverse wrap it and test fit. If there is still not enough resistance or feels loose, then you may want to reorder with the appropriate size.
Answer by: Jeff Summitt on Jun 4, 2021, 9:28 AM
I need a shaft extender for a tour ad di 7tx and an extender for a Kai Li 6TX ? can you tell me what size extenders I need? I dont have a measuring tool handy.
Question by: Stephen Salata on Jun 15, 2023, 3:00 PM
Unfortunately, there is not a spec the manufacturer publishes for the inside diameter of a graphite shaft; it will have to be physically measured (inside calipers will work too). Even it it were published, it could change depending upon how much was trimmed from the butt and if the shaft had a parallel butt section or a constant taper profile.
Answer by: Jeff Summitt on Jun 16, 2023, 5:56 AM
Shipping and warranty

CONTINENTAL U.S.

Delivery in the 48 contiguous United States only, excluding Alaska and Hawaii.

Processing Time

Next Day / 2nd Day / 3rd Day Delivery orders may take up to 1 business day of processing prior to shipping. Standard Ground Shipping orders may take up to 3 business days of processing prior to shipping. You will be emailed with the tracking number once it ships out.

Standard Ground

$7.95 per order Flat Rate*.  Estimated delivery in 5-7 business days.  Not a guaranteed service.

3 Day Delivery

$14.95 per order Flat Rate*.  Deliver in 3 business days by 4:30 p.m. to most areas (by 7 p.m. to residences).  Does not include weekends or holidays.  3-Day Delivery is not a guaranteed service. Hireko is not responsible for delays on packages, no refunds will be issued.

2 Day Delivery

$21.95 per order Flat Rate*.  Deliver in 2 business days by 4:30 p.m. to most areas (by 7 p.m. to residences).  Does not include weekends or holidays. 2-Day Delivery is not a guaranteed service. Hireko is not responsible for delays on packages, no refunds will be issued.

Next Day Delivery

Price based on weight and destination.  Deliver the next business day by 3 p.m. to most areas.  Does not include weekends or holidays. 

 * Flat rate shipping does not apply to customers with special pricing arrangements (check with your sales rep for details).  Some items may not be applicable for flat rate shipping, including bags, box sets and other oversize products. Packaged/Boxed Sets do not qualify for 2nd day or 3 day air shipping.

 

ALASKA & HAWAII

Flat rate is not available for Alaska & Hawaii.  All shipping is based on weight and destination.

Processing Time

Next Day / 2nd Day Delivery orders may take up to 1 business day of processing prior to shipping. Standard Ground Shipping orders may take up to 3 business days of processing prior to shipping. You will be emailed with the tracking number once it ships out.

Standard Post Office Mail

Estimated delivery in 3-7 business days.  Not a guaranteed service.  Does not include weekends or holidays. 

2 Day Delivery

Deliver in 2 business days.  Not a guaranteed service.  Does not include weekends or holidays. Hireko is not responsible for delays on packages, no refunds will be issued.

Next Day Delivery

Deliver the next business day.  Not a guaranteed service.  Does not include weekends or holidays. Hireko is not responsible for delays on packages, no refunds will be issued.

 

INTERNATIONAL

International shipping rates are determined by weight, dimension and zone. Please contact our customer support team for a quote. All orders from outside the United States must be pre-paid in US dollars and are subject to normal import duty, taxes and customs clearance charges in the destination country. If a customer refuses shipment due to duties and taxes, they will be liable for any costs incurred by Hireko Golf.

If your shipment arrives damaged please contact [email protected] or call 1-626-330-5525 and we will assist you in replacing it. In the event that you would like to return any merchandise purchased from Hireko Golf that is not damaged or defective, you will be responsible for any shipping cost you may incur.

 

MISCELLANEOUS CHARGES

Address Correction Fees

Hireko is not responsible for fees charged by Fedex, UPS, Post Office or other shippers in instances where the customer provides Hireko with incorrect ship to or bill to address information (Street, City, State, Zip Code, etc.). Shipper correction fees will be the responsibility of the customer and the customer will therefore be charged for such fees.

These correction fees are applicable on orders generated from the following sources: phone orders, internet, email, regular postal mail, fax, edi, or other electronic means.

 

WARRANTY

The manufacturer warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the original invoice date. The manufacturer agrees, at its option during the warranty period, to repair any defect in material or workmanship or to furnish a repaired or refurbished product of equal value in exchange without charge. The customer is responsible for freight to Hireko to return the defective product. Hireko will return the replacement product (or returned product if not deemed under warranty) at no charge. Claims are subject to verification of the defect or malfunction. Submit clear pictures and proof of purchase confirmed by the original dated sales receipt for us to decide if the product will be covered under warranty prior to shipping your repair back to us for inspection. Products not purchased directly from Hireko or hirekogolf.com must be returned to the original retailer. Warranty claims may take up to 45 days to process from time of receipt.

This warranty does not cover:

  • Normal wear and tear
  • Any condition resulting from other than ordinary residential wear or any use for which the product was not intended, such as use in rental or contract trade or commercial use.
  • Any condition resulting from incorrect or inadequate maintenance or care.
  • Damage resulting from misuse, abuse, negligence, or accidents.
  • Product loss or theft
  • Any alterations made to the product not specifically intended by the product's design, including cosmetic and structural changes.
  • Dissatisfaction due to buyer’s remorse
  • Damages incurred during transportation.
  • Damages incurred during assembly or maintenance.
  • Clubhead dents anywhere except on the face of a club.
  • Shafts broken in the middle of the club.
  • Custom golf clubs ordered online cannot be returned if they do not fit the golfer; buyer assumes the risk when ordering.
  • Chipped paint or scuff marks
  • Clubhead cracks not made from clubface contact.

To make a warranty claim, please email [email protected] or call 1(626)330-5525.

Customer Reviews
Only registered users can write reviews. Please Sign in or create an account